• Documents
  • Authors
  • Tables
  • Log in
  • Sign up
  • MetaCart
  • DMCA
  • Donate

CiteSeerX logo

Advanced Search Include Citations
Advanced Search Include Citations

Measuring an IP network in situ (2005)

by Hal Burch
Add To MetaCart

Tools

Sorted by:
Results 1 - 9 of 9

Reverse traceroute

by Ethan Katz-bassett, Harsha V. Madhyastha, Vijay Kumar, Adhikari Colin Scott, Justine Sherry, Peter Wesep, Thomas Anderson, Arvind Krishnamurthy
"... Traceroute is the most widely used Internet diagnostic tool today. Network operators use it to help identify routing failures, poor performance, and router misconfigurations. Researchers use it to map the Internet, predict performance, geolocate routers, and classify the performance of ISPs. However ..."
Abstract - Cited by 58 (14 self) - Add to MetaCart
Traceroute is the most widely used Internet diagnostic tool today. Network operators use it to help identify routing failures, poor performance, and router misconfigurations. Researchers use it to map the Internet, predict performance, geolocate routers, and classify the performance of ISPs. However, traceroute has a fundamental limitation that affects all these applications: it does not provide reverse path information. Although various public traceroute servers across the Internet provide some visibility, no general method exists for determining a reverse path from an arbitrary destination. In this paper, we address this longstanding limitation by building a reverse traceroute tool. Our tool provides the same information as traceroute, but for the reverse path, and it works in the same case as traceroute, when the user may lack control of the destination. Our approach combines a number of ideas: source spoofing, IP timestamp and record route options, and multiple vantage points. We deploy our system on PlanetLab and compare reverse traceroute paths with traceroutes issued from the destinations. In the median case our tool finds 87 % of the hops seen in a directly measured traceroute along the same path, versus only 38 % if one simply assumes the path is symmetric, a common fallback given the lack of available tools. We then use our reverse traceroute system to study previously unmeasurable aspects of the Internet: we uncover more than a thousand peer-to-peer AS links invisible to current topology mapping efforts, we present a case study of how a content provider could use our tool to troubleshoot poor path performance, and we measure the latency of individual backbone links with, on average, sub-millisecond precision. 1
(Show Context)

Citation Context

...sed return TTL values to estimate reverse routing maps towards sources; however, the resulting maps contained less than half the actual links, as well as containing multiple paths from many locations =-=[6]-=-. PlanetSeer [39] and Hubble [17] gave techniques for isolating failures to either the forward or reverse path; neither system, however, can give information about where on a reverse path the failure ...

One-Way Delay Estimation Using Network-Wide Measurements

by Omer Gurewitz, Israel Cidon, Senior Member, Moshe Sidi, Senior Member
"... Abstract—We present a novel approach for the estimation of one-way delays between network nodes without any time synchronization in the network. It is based on conducting multiple and simple one-way measurements among pairs of nodes, and estimating the one-way delays by optimizing the value of a glo ..."
Abstract - Cited by 10 (0 self) - Add to MetaCart
Abstract—We present a novel approach for the estimation of one-way delays between network nodes without any time synchronization in the network. It is based on conducting multiple and simple one-way measurements among pairs of nodes, and estimating the one-way delays by optimizing the value of a global objective function that is affected by the overall network topology and not just by individual measurements. We examine two objective functions. The first intuitive choice is the least square error (LSE). Using a novel concept of delay-induced link probabilities, we develop a second objective function that is based on the maximum-entropy (ME) principle. Extensive numerical experiments show that both functions considerably outperform the common method of halving the round-trip delays. They also show that ME outperforms the commonly used LSE. Index Terms—Delay estimation, mathematical optimization, maximum entropy, network measurements, one-way delay. I.
(Show Context)

Citation Context

...o-end delay measurements by solving a set of linear equations, assuming that either routing is symmetric (use round-trip measurements) or clocks are synchronized (use one-way measurements). Recently, =-=[13]-=- combined results similar to [12] with a measurement apparatus based on attaching a centralized measurement host and the set of border routers with dedicated asynchronous transfer mode (ATM) or multip...

System for improving internet . . .

by Ethan B. Katz-bassett , 2012
"... ..."
Abstract - Add to MetaCart
Abstract not found

unknown title

by S. García-jiménez, E. Magaña, M. Izal, D. Morató
"... IP addresses distribution in Internet and its application on reduction methods for IP alias resolution ..."
Abstract - Add to MetaCart
IP addresses distribution in Internet and its application on reduction methods for IP alias resolution
(Show Context)

Citation Context

... because the path and consequently the number of hops can be different for each interface at a certain router. In that case, larger TTL distances (for example up to 3) can be considered. • IPID-based =-=[6]-=-: like in alias resolution methods, the IPID field from the IP header is used to identify pairs of IP addresses that are good candidates to be alias. If both IP addresses belong to the same router, th...

unknown title

by M. Izal
"... IP addresses distribution in Internet and its application on reduction methods for IP alias resolution ..."
Abstract - Add to MetaCart
IP addresses distribution in Internet and its application on reduction methods for IP alias resolution
(Show Context)

Citation Context

...$25.00 ©2009 IEEE The 4th IEEE LCN Workshop on Network Measurements (WNM 2009) Zürich, Switzerland; 20-23 October 2009 case, larger TTL distances (for example up to 3) can be considered. • IPID-based =-=[6]-=-: like in alias resolution methods, the IPID field from the IP header is used to identify pairs of IP addresses that are good candidates to be alias. If both IP addresses belong to the same router, th...

methods for Internet

by Ann Telecommun, Santiago Garcia-jimenez, Eduardo Magaña, Daniel Morató, Mikel Izal, E. Magaña, D. Morató, M. Izal
"... On the performance and improvement of alias resolution ..."
Abstract - Add to MetaCart
On the performance and improvement of alias resolution
(Show Context)

Citation Context

...time is by applying alias resolution methods not to the full set of pairs but only to selected pairs of IP addresses with more probability to be aliases. These techniques are called reduction methods =-=[20]-=-, and they are a step previous to the application of alias resolution methods. The last metric, distributability, is related to the possibility of a method of being distributed between several probing...

Supported By

by unknown authors
"... Workshop Workshop index ..."
Abstract - Add to MetaCart
Workshop Workshop index
(Show Context)

Citation Context

...re [8]. Another alternative could be to improve efficiency of active probing methods by pre-selecting the pairs of IP addresses to check for aliasing. These techniques are called splitting methods in =-=[10]-=-. They are based on sending probes only to the set of IP addresses that have more higher probability to be aliases. The selection of which IP addresses have more probability to be aliases are based on...

unknown title

by M. Izal
"... IP addresses distribution in Internet and its application on reduction methods for IP alias resolution ..."
Abstract - Add to MetaCart
IP addresses distribution in Internet and its application on reduction methods for IP alias resolution
(Show Context)

Citation Context

... because the path and consequently the number of hops can be different for each interface at a certain router. In that case, larger TTL distances (for example up to 3) can be considered. • IPID-based =-=[6]-=-: like in alias resolution methods, the IPID field from the IP header is used to identify pairs of IP addresses that are good candidates to be alias. If both IP addresses belong to the same router, th...

Improving Efficiency of IP Alias Resolution based on Offsets between IP Addresses

by D. Morato ́, M. Izal
"... In order to get a router-level topology in Internet, IP address alias resolution techniques allow to identify IP addresses that belong to the same router. There are several proposals to make this identification, some based on active measurements and others based on inference studies. The former prov ..."
Abstract - Add to MetaCart
In order to get a router-level topology in Internet, IP address alias resolution techniques allow to identify IP addresses that belong to the same router. There are several proposals to make this identification, some based on active measurements and others based on inference studies. The former provides more accuracy and completeness, however efficiency is very low because of the high number of probes needed. These methods probe IP addresses in pairs. With thousands or even more IP addresses to check for aliases, the number of tests gets too high. In order to reduce the number of probes, we propose to select the pairs of IP addresses to test for aliasing using information available a priori. This selection will be based on the offset (numerical distance) between the IP addresses to test. We will show that we can improve efficiency of active alias identification with almost no loss on completeness and without generating probing traffic. The technique is also adaptable to a distributed measurement scenario. I.
(Show Context)

Citation Context

...re [8]. Another alternative could be to improve efficiency of active probing methods by pre-selecting the pairs of IP addresses to check for aliasing. These techniques are called splitting methods in =-=[10]-=-. They are based on sending probes only to the set of IP addresses that have more higher probability to be aliases. The selection of which IP addresses have more probability to be aliases are based on...

Powered by: Apache Solr
  • About CiteSeerX
  • Submit and Index Documents
  • Privacy Policy
  • Help
  • Data
  • Source
  • Contact Us

Developed at and hosted by The College of Information Sciences and Technology

© 2007-2019 The Pennsylvania State University