### Table 5: The results of the super-resolution image reconstruction.

"... In PAGE 17: ...(0; 0); (0; 2); (1; 1); (1; 3); (2; 0); (2; 2); (3; 1); (3; 3)g, see Figure 5. As in x4.2.2, the tensor product of the lowpass lter m in Example 2 is used to generate the low-resolution images, and white noises at SNR = 40dB are added. Table5 shows the results of the least squares model, and Algorithms 2 and 3 with symmetric boundary conditions. The optimal in Step 2 and Step 4 are 0:0121 and 0:0105 for the least squares method and 0:0170 and 0:0161 for Algorithm 2 respectively.... ..."

### Table 5: The results of the super-resolution image reconstruction.

"... In PAGE 17: ...(0; 0); (0; 2); (1; 1); (1; 3); (2; 0); (2; 2); (3; 1); (3; 3)g, see Figure 5. As in x4.2.2, the tensor product of the lowpass lter m in Example 2 is used to generate the low-resolution images, and white noises at SNR = 40dB are added. Table5 shows the results of the least squares model, and Algorithms 2 and 3 with symmetric boundary conditions. The optimal in Step 2 and Step 4 are 0:0121 and 0:0105 for the least squares method and 0:0170 and 0:0161 for Algorithm 2 respectively.... ..."

### Table 1. Super-resolution output of the MAP-B estimator.

"... In PAGE 6: ... 3 shows a full frame extracted from a video showing text of various sizes from the Gettysburg Address. Table1 shows the results of a test in which the super-resolution process uses up to 32 input images of various-size text. Fig.... ..."

### Table 1: MSE comparison for the high resolution Vase and Jodu images and depth map obtained using bi-cubic interpolation and our super-resolution approach with an upsam- pling factor of 2 with different source positions. The (DEPTH) row in the table gives the MSE for the depth field.

"... In PAGE 8: ... For quantitative comparison, we use mean square error (MSE) as a figure of merit. Table1 shows the MSE comparison for the super-resolved image and the depth map (for both Vase and Jodu images) and the case when interpolated values of the surface gradients and albedo are used for reconstruction of the up-sampled depth and intensity map. Al- though, not much difference can be seen in the high resolution images reconstructed using the two methods, the MSE values clearly show that the high resolution images obtained using our graph cuts based approach are much better than those obtained using bi-cubic interpolation.... ..."

### Table II. Averaged PSNR value in Db measured over a test pool of digital images in case of super resolution.

### Table 4: Contrast and Image mottle enhancement from the original input image and for each deconvolu- tion method (enhancement expressed in percentage). Respectively; the Van-Cittert (VC), the Landweber (LW), the Richardson-Lucy (RL), the Super Resolution (SR), the Molina (MO), the IBD, the Biggs-Lucy (BL), the NAS-RIF and nally, the You-Kaveh apos;s (YK) algorithm.

"... In PAGE 16: ... Due to the di erence of thickness between the cross-sectional slices of the real and segmented phantom, these abovementioned measures are estimated on the whole 3D phantom after this one has been registered [22] on the ground truth of the segmented phantom volume (see Figure 10 where some consecutive slices of the segmented phantom are shown). Table4 gives the contrast and image mottle for each deconvolution technique applied on this SPECT phantom. Amongst the supervised deconvolution schemes, the Landweber apos;s algorithm allows to increase sig- ni cantly the contrast of the image but at cost of an unacceptable increase of the mottle of the image (+33:0% of mottle).... ..."

### Table 3: Performance of CMixed criterion with L1-norm regularisation for three 15 frames sequences.

2004

"... In PAGE 7: ...Table3... In PAGE 7: ... From left to right: ground truth, standard resolution, super resolution and bilinear interpolation. Table3 shows that super resolution approach gives a solution a bit closer to standard resolution reconstruction than a simple bilinear interpolation approach. Partial views on Figure 4 show a good localisation of buildings even if some errors occur in form of spurious junctions between buildings, which are less a- grant with the standard resolution sequence.... ..."

Cited by 2

### Table 1: Iteration number for each supervised deconvolution method as chosen by the proposed stopping rule. Respectively; the Van-Cittert (VC), the Landweber (LW), the Richardson-Lucy (RL), the Super Resolution (SR) and the Molina apos;s (MO) algorithms.

"... In PAGE 14: ... For the unregularized supervised deconvolution methods, the termination criteria is given by the stopping strategy presented in Section 3.4 (see Table1 ). For the blind deconvolution methods requiring... ..."