## MULTI-CARRIER SIGNALING FOR HIGH-SPEED ELECTRICAL (2008)

### BibTeX

@MISC{08multi-carriersignaling,

author = {},

title = {MULTI-CARRIER SIGNALING FOR HIGH-SPEED ELECTRICAL},

year = {2008}

}

### OpenURL

### Abstract

ii

### Citations

28 | Closing the Gap Between ASIC and Custom: An ASIC Perspective
- Chinnery, Keutzer
(Show Context)
Citation Context ...x C Semi-Custom High-Speed Datapath Design Fully custom-designed integrated circuits can achieve significantly better performance compared to circuits designed following an automated ASIC design flow =-=[57]-=-. This higher performance is generally achieved through optimal logic design and sizing, better placement of the cells and optimized routing. For this reason many time-critical circuits are generally ... |

26 | Circuits and techniques for highresolution measurement of on-chip power supply noise
- Alon, Stojanovic, et al.
- 2005
(Show Context)
Citation Context ...sion of this term in the model instead of a scalar bias term acknowledges the fact that many noise sources in the system, including supply noise and clock feed-through, are cyclo-stationary in nature =-=[53]-=-. The second term is the convolution of the input signal and the linear response. The other terms are higher order non-linearity terms. All the convolutions in Equation 6.14 can represent CTV convolut... |

19 |
The role of custom design
- Dally, Chang
- 2000
(Show Context)
Citation Context ...properly set up, the characterization process takes only a few hours to a few days per cell. This is particularly efficient for a datapath since the number of unique building blocks can be very small =-=[59]-=-. With a library of cells at hand, the design entry can start at Hardware Description Language (HDL) level, and a synthesis tool can be used to create a preliminary timing report and a flat (Register ... |

14 | Transmit Preemphasis for High-speed Time-Division-Multiplexed Serial Link Transceiver
- StojanoviC, Ginis, et al.
- 1992
(Show Context)
Citation Context ...time-variant equalizer with a period of 4, for example, is to parallelize the equalizer to four parallel branches, and let the four sets of equalizer taps in the four branches take independent values =-=[54]-=-. Such an equalizer already exists in our transmitter. A block diagram of CTV compensated system is shown in Figure 6.10(a). The equalizer is a cyclically time-variant FIR filter with period of 4. Fig... |

7 | Phase-Locked Loop Dynamics in the Presence of Noise by FokkerPlanck Techniques - Viterbi |

3 |
Simplified Volterra Series Based Behavioral Modeling
- Zhu, Dooley, et al.
- 2006
(Show Context)
Citation Context ... can also be extended to modeling non-linearity in weakly non-linear circuits. In this section we use the Volterra series representation of weakly non-linear a circuit for estimating its nonlinearity =-=[51]-=-[52]. Volterra series approximation for systems is similar to a Taylor series approximation for functions. Using Volterra series, the output can be written as: y( n) = h0 ( n) + ∑ x( n − m1) h1( m1) +... |

3 |
Adaptive weighted least squares algorithm for volterra signal modeling. Circuits and Systems I: Fundamental Theory and Applications
- Chan, Stathaki, et al.
- 2000
(Show Context)
Citation Context ... also be extended to modeling non-linearity in weakly non-linear circuits. In this section we use the Volterra series representation of weakly non-linear a circuit for estimating its nonlinearity [51]=-=[52]-=-. Volterra series approximation for systems is similar to a Taylor series approximation for functions. Using Volterra series, the output can be written as: y( n) = h0 ( n) + ∑ x( n − m1) h1( m1) + ∑ x... |

1 |
et al., “Precursor ISI Reduction
- Ren
- 2007
(Show Context)
Citation Context ...tation loop changes the position of the zero-crossings at the receiver, and the zero-crossings affect the optimal sampling point, which in return affects the information used for equalizer adaptation =-=[55]-=-. Such edge-based methods are in particular not very useful for AMT since the zero crossings in AMT for a particular sub-channel carry strong interference caused by the other sub-channels. An alternat... |