A 2.4-GHz CMOS Receiver for IEEE 802.11 Wireless LAN’s (1999)
by
Behzad Razavi
| Citations: | 12 - 0 self |
BibTeX
@MISC{Razavi99a2.4-ghz,
author = {Behzad Razavi},
title = { A 2.4-GHz CMOS Receiver for IEEE 802.11 Wireless LAN’s},
year = {1999}
}
Bookmark
 |
 |
 |
 |
 |
 |
OpenURL
Abstract
This paper describes a radio-frequency receiver targeting spread-spectrum wireless local-area-network applications in the 2.4-GHz band. Based on a direct-conversion architecture, the receiver employs partial channel selection filtering, dc offset removal, and baseband amplification. Fabricated in a 0.6-"m CMOS technology, the receiver achieves a noise figure of 8.3 dB, s€Q s€Q s€Q of 09 dBm, s € s€P s € of +22 dBm, and voltage gain of 34 dB while dissipating 80 mW from a 3-V supply. Index Terms—Low noise amplifier (LNA’s), mixers, receivers, RF CMOS, wireless local area networks (LAN’s).
Citations
| 81 | Direct-Conversion Radio Transceivers for Digital Communications - Abidi - 1995 |
| 56 | Design Considerations for Direct-Conversion Receivers - Razavi - 1997 |
| 23 | RF Microelectronics. Upper Saddle River - Razavi - 1998 |
| 17 | standard: Wireless LAN medium access control (MAC) and physical layer (PHY) specifications - IEEE - 2007 |
| 3 | Hageraats, “A 2.5 GHz BiCMOS transceiver for wireless LAN - Meyer, Mack, et al. - 1997 |
| 3 | et al., “A single-chip 900-MHz spread-spectrum wireless transceiver in 1-"m CMOS—Part I: Architecture and transmitter design - Rofougaran - 1998 |
| 1 | et al., “A single-ship CMOS direct-conversion transceiver for 900 MHz spread-spectrum digital phones - Cho - 1999 |
| 1 | et al., “A wideband direct-conversion receiver for WCDMA applications - Parssinen - 1999 |
