MILLER OTA DESIGN USING A DESIGN METHODOLOGY BASED ON THE GM/ID AND EARLY-VOLTAGE CHARACTERISTICS: DESIGN CONSIDERATIONS AND EXPERIMENTAL RESULTS
BibTeX
@MISC{Cortes_millerota,
author = {O Paixão Cortes and Sergio Bampi},
title = {MILLER OTA DESIGN USING A DESIGN METHODOLOGY BASED ON THE GM/ID AND EARLY-VOLTAGE CHARACTERISTICS: DESIGN CONSIDERATIONS AND EXPERIMENTAL RESULTS},
year = {}
}
Bookmark
 |
 |
 |
 |
 |
 |
OpenURL
Abstract
Analog circuit design is a challenging activity because the analog design procedure targets complex design specifications that are closely related to transistor sizing and device technology dependent. This paper addresses the design of CMOS Miller Operational Transconductance Amplifier (OTA) using a design methodology based on the gm/ID characteristic with some new features, including to the design method phase an additional phase: choosing the transistor lengths (L) to minimize power. The analog module was analyzed, designed and prototyped in AMS0.35µm CMOS technology. Experimental results are presented, in order to validate the methodology. 1.
Citations
| 98 | CMOS Analog Circuit Design - Allen, Holberg |
| 5 | A gm/ID based methodology for the design of CMOS analog circuits and its application to the synthesis of a silicon-on-insulator micropower OTA - Silveira, Flandre, et al. - 1996 |
| 1 | Analysis and design of amplifiers and comparators - Cortes, Fabris, et al. |
| 1 | Applying the Gm/ID Method in the analysis and design of Miller amplifier - Cortes, Fabris, et al. - 2003 |
| 1 | Bampi Design Using Trapezoidal Association of MOS Transistors - Girardi, Cortes, et al. - 2005 |
| 1 | An Analog Signal Interface with Constant Performance for SOCs - unknown authors - 2003 |
