### Citations

249 |
Boundary Integral and Singularity Methods for Linearized Viscous Flow.
- Pozrikidis
- 1992
(Show Context)
Citation Context ...ty, a = half height of channel and U = γ/µ. Bo = ρga2/γ is the Bond number and −→e g is the unit vector in the direction of gravity. 3 Numerical method The boundary element method (BEM) ([8], [9] and =-=[10]-=-) is used to solve the above governing equations. This method is based on the fact that the solution of linear, elliptic, homogeneous, partial differential equations can be represented by boundary int... |

118 |
Boundary Elements: An introductory Course.
- Brebbia, Dominguez
- 1989
(Show Context)
Citation Context ...iquid viscosity, a = half height of channel and U = γ/µ. Bo = ρga2/γ is the Bond number and −→e g is the unit vector in the direction of gravity. 3 Numerical method The boundary element method (BEM) (=-=[8]-=-, [9] and [10]) is used to solve the above governing equations. This method is based on the fact that the solution of linear, elliptic, homogeneous, partial differential equations can be represented b... |

78 |
On the motion of a small viscous droplet that wets a surface
- Greenspan
- 1978
(Show Context)
Citation Context ...nel wall the no-slip and no penetration boundary condition is used. The lower wall requires special attention as we have two contact lines. The contact line velocity is computed using a Tanner’s law (=-=[11]-=-) as follows ucl = k(θD − θS) (6) where θD is the dynamic contact angle between the bubble surface and channel wall at the contact line, while θS is the static contact angle. The velocity then decreas... |

8 |
Acoustic droplet vaporization for therapeutic and diagnostic applications," Ultrasound Med.
- Kripfgans, Fowlkes, et al.
- 2000
(Show Context)
Citation Context ...d is used to track their motion. At the desired location the bubbles are vaporized using high intensity ultrasound to produce gas bubbles which are several times larger than the initial droplet size (=-=[1, 2, 3, 4, 5, 6, 7]-=-). These bubbles then stick in the vasculature, occluding the flow. The bubble sticking process likely involves the bubble contacting the vessel wall and then either sticking immediately or sliding so... |

6 |
vivo droplet vaporization for occlusion therapy and phase aberration correction
- Kripfgans, Fowlkes, et al.
(Show Context)
Citation Context ...d is used to track their motion. At the desired location the bubbles are vaporized using high intensity ultrasound to produce gas bubbles which are several times larger than the initial droplet size (=-=[1, 2, 3, 4, 5, 6, 7]-=-). These bubbles then stick in the vasculature, occluding the flow. The bubble sticking process likely involves the bubble contacting the vessel wall and then either sticking immediately or sliding so... |

5 |
On the acoustic vaporization of micrometer-sized droplets,"
- Kripfgans, Fabiilli, et al.
- 2004
(Show Context)
Citation Context ...d is used to track their motion. At the desired location the bubbles are vaporized using high intensity ultrasound to produce gas bubbles which are several times larger than the initial droplet size (=-=[1, 2, 3, 4, 5, 6, 7]-=-). These bubbles then stick in the vasculature, occluding the flow. The bubble sticking process likely involves the bubble contacting the vessel wall and then either sticking immediately or sliding so... |

5 |
Direct numerical simulations of micro-bubble expansion in gas embolotherapy.
- Ye, JL
- 2004
(Show Context)
Citation Context |

3 |
Cardiovascular bubble dynamics,"
- Bull
- 2005
(Show Context)
Citation Context |

3 | Bubble splitting in bifurcating tubes: a model study of cardiovascular gas emboli transport.,"
- Calderon, Fowlkes, et al.
- 2005
(Show Context)
Citation Context |

2 |
Bubble transport in gas embolotherapy,"
- Bull
- 2003
(Show Context)
Citation Context |

1 |
A theoretical model of a molecularmotor-powered pump
- Bull, Hunt, et al.
- 2005
(Show Context)
Citation Context ... viscosity, a = half height of channel and U = γ/µ. Bo = ρga2/γ is the Bond number and −→e g is the unit vector in the direction of gravity. 3 Numerical method The boundary element method (BEM) ([8], =-=[9]-=- and [10]) is used to solve the above governing equations. This method is based on the fact that the solution of linear, elliptic, homogeneous, partial differential equations can be represented by bou... |