Abstract—Extended-counting analog-to-digital conversion combines the accuracy of 61 modulation with the speed of algorithmic conversion. In this paper, a double-sampling technique is introduced for this type of converter. It is based on a variant of the fully floating bilinear integrator. This way, the clock frequency of the converter is almost halved. An experimental converter was designed in a 0.6- m CMOS technology for a bandwidth of 500 kHz at a 3.3-V supply. In the switched-capacitor implementation, the hardware is extensively reused. This way, the converter can be realized with only one operational amplifier. On the other hand, compared to alternative implementations, the amount of switches is increased. These are designed carefully in order not to degrade the performance. The converter converts a sample in 24 clock cycles and achieves a dynamic range of 87 dB. The peak signal-to-noise ratio (SNR) and signal-to-noise-plus-distortion ratio (SNDR) were measured to be 82 and 81 dB, respectively. The power consumption was 28-mW analog and 20-mW digital. The converter core occupies 0.7 mmP including digital logic. Index Terms—Analog-to-digital conversion, double sampling, extended counting. I.

c○2004 IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.

Abstract not found