An ad-hoc mobile network is a collection of mobile nodes that are dynamically and arbitrarily located in such a manner that the interconnections between nodes are capable of changing on a continual basis. In order to facilitate communication within the network, a routing protocol is used to discover routes between nodes. The primary goal of such an ad-hoc network routing protocol is correct and efficient route establishment between a pair of nodes so that messages may be delivered in a timely manner. Route construction should be done with a minimum of overhead and bandwidth consumption. This paper examines routing protocols for ad-hoc networks and evaluates these protocols based on a given set of parameters. The paper provides an overview of eight different protocols by presenting their characteristics and functionality, and then provides a comparison and discussion of their respective merits and drawbacks.

We present a new distributed routing protocol for mobile, multihop, wireless networks. The protocol is one of a family of protocols which we term "link reversal" algorithms. The protocol's reaction is structured as a temporally-ordered sequence of diffusing computations; each computation consisting of a sequence of directed l i nk reversals. The protocol is highly adaptive, efficient and scalable; being best-suited for use in large, dense, mobile networks. In these networks, the protocol's reaction to link failures typically involves only a localized "single pass" of the distributed algorithm. This capability is unique among protocols which are stable in the face of network partitions, and results in the protocol's high degree of adaptivity. This desirable behavior is achieved through the novel use of a "physical or logical clock" to establish the "temporal order" of topological change events which is used to structure (or order) the algorithm's reaction to topological changes. We refer to the protocol as the Temporally-Ordered Routing Algorithm (TORA).

In this paper we present a case for using new power-aware metrics for determining routes in wireless ad hoc networks. We present five different metrics based on battery power consumption at nodes. We show that using these metrics in a shortest-cost routing algorithm reduces the cost/packet of routing packets by 5-30% over shortest-hop routing (this cost reduction is on top of a 40-70% reduction in energy consumption obtained by using PAMAS, our MAC layer protocol). Furthermore, using these new metrics ensures that the mean time to node failure is increased significantly. An interesting property of using shortest-cost routing is that packet delays do not increase. Finally, we note that our new metrics can be used in most traditional routing protocols for ad hoc networks. 1

An ad-hoc network of wireless static nodes is considered as it arises in a rapidly deployed, sensor based, monitoring system. Information is generated in certain nodes and needs to reach a set of designated gateway nodes. Each node may adjust its power within a certain range that determines the set of possible one hop away neighbors. Traffic forwarding through multiple hops is employed when the intended destination is not within immediate reach. The nodes have limited initial amounts of energy that is consumed in different rates depending on the power level and the intended receiver. We propose algorithms to select the routes and the corresponding power levels such that the time until the batteries of the nodes drain-out is maximized. The algorithms are local and amenable to distributed implementation. When there is a single power level, the problem is reduced to a maximum flow problem with node capacities and the algorithms converge to the optimal solution. When there are multiple power levels then the achievable lifetime is close to the optimal (that is computed by linear programming) most of the time. It turns out that in order to maximize the lifetime, the traffic should be routed such that the energy consumption is balanced among the nodes in proportion to their energy reserves, instead of routing to minimize the absolute consumed power.

An ad hoc network is a collection of wireless computers (nodes), communicating among themselves over possibly multihop paths, without the help of any infrastructure such as base stations or access points. Although many previous ad hoc network routing protocols have been based in part on distance vector approaches, they have generally assumed a trusted environment. In this paper, we design and evaluate the Secure Efficient Ad hoc Distance vector routing protocol (SEAD), a secure ad hoc network routing protocol based on the design of the Destination-Sequenced Distance-Vector routing protocol. In order to support use with nodes of limited CPU processing capability, and to guard against Denial-of-Service attacks in which an attacker attempts to cause other nodes to consume excess network bandwidth or processing time, we use efficient one-way hash functions and do not use asymmetric cryptographic operations in the protocol. SEAD performs well over the range of scenarios we tested, and is robust against multiple uncoordinated attackers creating incorrect routing state in any other node, even in spite of any active attackers or compromised nodes in the network.

Most recent ad hoc network research has focused on providing routing services without considering security. In this paper, we detail security threats against ad hoc routing protocols, specifically examining AODV and DSR. In light of these threats, we identify three different environments with distinct security requirements. We propose a solution to one, the managed-open scenario where no network infrastructure is pre-deployed, but a small amount of prior security coordination is expected. Our protocol, ARAN, is based on certificates and successfully defeats all identified attacks.

This document is an Internet-Draft and is NOT offered in accordance with Section 10 of RFC2026, and the author does not provide the IETF with any rights other than to publish as an Internet-Draft. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at

An ad-hoc network is the cooperative engagement of a collection of (typically wireless) mobile nodes without the required intervention of any centralized access point or existing infrastructure. To provide optimal communication ability, a routing protocol for such a dynamic self-starting network must be capable of unicast, broadcast, and multicast. In this paper we extend Ad-hoc On-Demand Distance Vector Routing (AODV), an algorithm for the operation of such ad-hoc networks, to offer novel multicast capabilities which follow naturally from the way AODV establishes unicast routes. AODV builds multicast trees as needed (i.e., on-demand) to connect multicast group members. Control of the multicast tree is distributed so that there is no single point of failure. AODV provides loop-free routes for both unicast and multicast, even while repairing broken links. We include an evaluation methodology and simulation results to validate the correct and efficient operation of the AODV algorithm.

In this paper, we study the performance of route query control mechanisms for the Zone Routing Protocol (ZRP) for ad hoc networks. ZRP proactively maintains routing information for a local neighborhood (routing zone), while reactively acquiring routes to destinations beyond the routing zone. This hybrid routing approach can be more efficient than traditional routing schemes. However, without proper query control techniques, the ZRP cannot provide the expected reduction in the control traffic.

This paper presents a novel multicast routing protocol for mobile ad hoc wireless networks. The protocol, termed ODMRP (On-Demand Multicast Routing Protocol), is a mesh-based, rather than a conventional treebased, multicast scheme and uses a forwarding group concept (only a subset of nodes forwards the multicast packets via scoped flooding). It applies on-demand procedures to dynamically build routes and maintain multicast group membership. ODMRP is well suited for ad hoc wireless networks with mobile hosts where bandwidth is limited, topology changes frequently, and power is constrained. We evaluate ODMRP's scalability and performance via simulation.