In this paper, we consider tiled chip multiprocessors (CMP) where each tile contains a slice of the total on-chip L2 cache storage and tiles are connected by an on-chip network. The L2 slices can be managed using two basic schemes: 1) each slice is treated as a private L2 cache for the tile 2) all slices are treated as a single large L2 cache shared by all tiles. Private L2 caches provide the lowest hit latency but reduce the total effective cache capacity, as each tile creates local copies of any line it touches. A shared L2 cache increases the effective cache capacity for shared data, but incurs long hit latencies when L2 data is on a remote tile. We present a new cache management policy, victim replication, which combines the advantages of private and shared schemes. Victim replication is a variant of the shared scheme which attempts to keep copies of local primary cache victims within the local L2 cache slice. Hits to these replicated copies reduce the effective latency of the shared L2 cache, while retaining the benefits of a higher effective capacity for shared data. We evaluate the various schemes using full-system simulation of both single-threaded and multi-threaded benchmarks running on an 8-processor tiled CMP. We show that victim replication reduces the average memory access latency of the shared L2 cache by an average of 16%for multi-threaded benchmarks and 24%for single-threaded benchmarks, providing better overall performance than either private or shared schemes.

In response to increasing (relative) wire delay, architects have proposed various technologies to manage the impact of slow wires on large uniprocessor L2 caches. Block migration (e.g., D-NUCA and NuRapid) reduces average hit latency by migrating frequently used blocks towards the lower-latency banks. Transmission Line Caches (TLC) use on-chip transmission lines to provide low latency to all banks. Traditional stride-based hardware prefetching strives to tolerate, rather than reduce, latency. Chip multiprocessors (CMPs) present additional challenges. First, CMPs often share the on-chip L2 cache, requiring multiple ports to provide sufficient bandwidth. Second, multiple threads mean multiple working sets, which compete for limited on-chip storage. Third, sharing code and data interferes with block migration, since one processor's low-latency bank is another processor's high-latency bank. In this paper, we develop L2 cache designs for CMPs that incorporate these three latency management techniques. We use detailed full-system simulation to analyze the performance trade-offs for both commercial and scientific workloads. First, we demonstrate that block migration is less effective for CMPs because 40-60% of L2 cache hits in commercial workloads are satisfied in the central banks, which are equally far from all processors. Second, we observe that although transmission lines provide low latency, contention for their restricted bandwidth limits their performance. Third, we show stride-based prefetching between L1 and L2 caches alone improves performance by at least as much as the other two techniques. Finally, we present a hybrid design-combining all three techniques-that improves performance by an additional 2% to 19% over prefetching alone.

Chip multiprocessor (CMP) systems have made the on-chip caches a critical resource shared among co-scheduled threads. Limited off-chip bandwidth, increasing on-chip wire delay, destructive inter-thread interference, and diverse workload characteristics pose key design challenges. To address these challenge, we propose CMP cooperative caching (CC), a unified framework to efficiently organize and manage on-chip cache resources. By forming a globally managed, shared cache using cooperative private caches. CC can effectively support two important caching applications: (1) reduction of average memory access latency and (2) isolation of destructive inter-thread interference. CC reduces the average memory access latency by balancing between cache latency and capacity opti-mizations. Based private caches, CC naturally exploits their access latency benefits. To improve the effective cache capacity, CC forms a “shared ” cache using replication control and LRU-based global replacement policies. Via cooperation throttling, CC provides a spectrum of caching behaviors between the two extremes of private and shared caches, thus enabling dynamic adaptation to suit workload requirements. We show that CC can achieve a robust performance advantage over private and shared cache schemes across different processor, cache and memory configurations, and a wide selection of multithreaded and multiprogrammed

This paper examines the area, power, performance, and design issues for the on-chip interconnects on a chip multiprocessor, attempting to present a comprehensive view of a class of interconnect architectures. It shows that the design choices for the interconnect have significant effect on the rest of the chip, potentially consuming a significant fraction of the real estate and power budget. This research shows that designs that treat interconnect as an entity that can be independently architected and optimized would not arrive at the best multicore design. Several examples are presented showing the need for careful co-design. For instance, increasing interconnect bandwidth requires area that then constrains the number of cores or cache sizes, and does not necessarily increase performance. Also, shared level-2 caches become significantly less attractive when the overhead of the resulting crossbar is accounted for. A hierarchical bus structure is examined which negates some of the performance costs of the assumed baseline architecture. 1

Chip multiprocessors (CMPs) substantially increase capacity pressure on the on-chip memory hierarchy while requiring fast access. Neither private nor shared caches can provide both large capacity and fast access in CMPs. We observe that compared to symmetric multiprocessors (SMPs), CMPs change the latency-capacity tradeoff in two significant ways. We propose three novel ideas to exploit the changes: (1) Though placing copies close to requestors allows fast access for read-only sharing, the copies also reduce the already-limited on-chip capacity in CMPs. We propose controlled replication to reduce capacity pressure by not making extra copies in some cases, and obtaining the data from an existing on-chip copy. This option is not suitable for SMPs because obtaining data from another processor is expensive and capacity is not limited to on-chip storage. (2) Unlike SMPs, CMPs allow fast on-chip communication between processors for read-write sharing. Instead of incurring slow access to read-write shared data through coherence misses as do SMPs, we propose in-situ communication to provide fast access without making copies or incurring coherence misses. (3) Accessing neighborsý caches is not as expensive in CMPs as it is in SMPs. We propose capacity stealing in which private data that exceeds a coreýs capacity is placed in a neighboring cache with less capacity demand. To incorporate our ideas, we use a hybrid of private, per-processor tag arrays and a shared data array. Because the shared data array is slow, we employ non-uniform access and distance associativity from previous proposals to hold frequently-accessed data in regions close to the requestor. We extend the previously-proposed Non-uniform access with Replacement And Placement usIng Distance associativity (NuRAPID) to CMPs, and call our cache CMP-NuRAPID. Our results show that for a 4-core CMP with 8 MB cache, CMP-NuRAPID improves performance by 13% over a shared cache and 8% over private caches for three commercial multithreaded workloads.

The on-chip communication requirements of many systems are best served through the deployment of a regular chip-wide network. This paper presents the design of a low-latency on-chip network router for such applications. We remove control overheads (routing and arbitration logic) from the critical path in order to minimise cycle-time and latency. Simulations illustrate that dramatic cycle time improvements are possible without compromising router efficiency. Furthermore, these reductions permit flits to be routed in a single cycle, maximising the effectiveness of the router’s limited buffering resources. 1.

This paper presents and studies a distributed L2 cache management approach through OS-level page allocation for future many-core processors. L2 cache management is a crucial multicore processor design aspect to overcome non-uniform cache access latency for good program performance and to reduce on-chip network traffic and related power consumption. Unlike previously studied hardwarebased private and shared cache designs implementing a "fixed" caching policy, the proposed OS-microarchitecture approach is flexible; it can easily implement a wide spectrum of L2 caching policies without complex hardware support. Furthermore, our approach can provide differentiated execution environment to running programs by dynamically controlling data placement and cache sharing degrees. We discuss key design issues of the proposed approach and present preliminary experimental results showing the promise of our approach.

Wire delays continue to grow as the dominant component oflatency for large caches.A recent work proposed an adaptive,non-uniform cache architecture (NUCA) to manage large, on-chipcaches.By exploiting the variation in access time acrosswidely-spaced subarrays, NUCA allows fast access to closesubarrays while retaining slow access to far subarrays.Whilethe idea of NUCA is attractive, NUCA does not employ designchoices commonly used in large caches, such as sequential tag-dataaccess for low power.Moreover, NUCA couples dataplacement with tag placement foregoing the flexibility of dataplacement and replacement that is possible in a non-uniformaccess cache.Consequently, NUCA can place only a few blockswithin a given cache set in the fastest subarrays, and mustemploy a high-bandwidth switched network to swap blockswithin the cache for high performance.In this paper, we proposethe Non-uniform access with Replacement And PlacementusIng Distance associativity" cache, or NuRAPID, whichleverages sequential tag-data access to decouple data placementfrom tag placement.Distance associativity, the placementof data at a certain distance (and latency), is separated from setassociativity, the placement of tags within a set.This decouplingenables NuRAPID to place flexibly the vast majority offrequently-accessed data in the fastest subarrays, with fewerswaps than NUCA.Distance associativity fundamentallychanges the trade-offs made by NUCA's best-performingdesign, resulting in higher performance and substantiallylower cache energy.A one-ported, non-banked NuRAPIDcache improves performance by 3% on average and up to 15%compared to a multi-banked NUCA with an infinite-bandwidthswitched network, while reducing L2 cache energy by 77%.

A significant part of future microprocessor real estate will be dedicated to L2 or L3 caches. These on-chip caches will heavily impact processor perfor- mance, power dissipation, and thermal management strategies. There are a number of interconnect design considerations that influence power/performance/area characteristics of large caches, such as wire mod- els (width/spacing/repeaters), signaling strategy (RC/differential/transmission), router design, etc. Yet, to date, there exists no analytical tool that takes all of these parameters into account to carry out a design space exploration for large caches and estimate an optimal organization. In this work, we implement two major extensions to the CACTI cache modeling tool that focus on interconnect design for a large cache. First, we add the ability to model different types of wires, such as RC-based wires with different power/delay characteristics and differential low-swing buses. Second, we add the ability to model Non-uniform Cache Access (NUCA). We not only adopt state-of-the-art design space exploration strategies for NUCA, we also enhance this exploration by considering on-chip network contention and a wider spectrum of wiring and routing choices. We present a validation analysis of the new tool (to be released as CACTI 6.0) and present a case study to showcase how the tool can improve architecture research methodologies.

This paper describes the polymorphous TRIPS architecture which can be configured for different granularities and types of parallelism. TRIPS contains mechanisms that enable the processing cores and the on-chip memory system to be configured and combined in different modes for instruction, data, or thread-level parallelism. To adapt to small and large-grain concurrency, the TRIPS architecture contains four out-of-order, 16-wide-issue Grid Processor cores, which can be partitioned when easily extractable fine-grained parallelism exists. This approach to polymorphism provides better performance across a wide range of application types than an approach in which many small processors are aggregated to run workloads with irregular parallelism. Our results show that high performance can be obtained in each of the three modes--ILP, TLP, and DLP--demonstrating the viability of the polymorphous coarse-grained approach for future microprocessors.