Wireless local area networks (W-LANs) have become increasingly popular due to the recent availability of affordable devices that are capable of communicating at high data rates. These high rates are possible, in part, through new modulation schemes that are optimized for the channel conditions bringing about a dramatic increase in bandwidth efficiency. Since the choice of which modulation scheme to use depends on the current state of the transmission channel, newer wireless devices often support multiple modulation schemes, and hence multiple data rates, with mechanisms to switch between them. Users are given the option to either select an operational data rate manually or to let the device automatically choose the appropriate modulation scheme (data rate) to match the prevailing conditions. Automatic rate selection protocols have been studied for cellular networks but there have been relatively few proposals for W-LANs. In this paper we present a rate adaptive MAC protocol called the Receiver-Based AutoRate (RBAR) protocol. The novelty of RBAR is that its rate adaptation mechanism is in the receiver instead of in the sender. This is in contrast to existing schemes in devices like the WaveLAN II [15]. We show that RBAR is better because it results in a more efficient channel quality estimation which is then reected in a higher overall throughput Our protocol is based on the RTS/CTS mechanism and consequently it can be incorporated into many medium access control protocols including the widely popular IEEE 802.11 protocol. Simulation results of an implementation of RBAR inside IEEE 802.11 show that RBAR performs consistently well.

We propose a variable-rate and variable-power MQAM modulation scheme for high-speed data transmission over fading channels. We first review results for the Shannon capacity of fading channels with channel side information, where capacity is achieved using adaptive transmission techniques. We then derive the spectral efficiency of our proposed modulation. We show that there is a constant power gap between the spectral efficiency of our proposed technique and the channel capacity, and this gap is a simple function of the required bit-error rate (BER). In addition, using just five or six different signal constellations, we achieve within 1--2 dB of the maximum efficiency using unrestricted constellation sets. We compute the rate at which the transmitter needs to update its power and rate as a function of the channel Doppler frequency for these constellation sets. We also obtain the exact efficiency loss for smaller constellation sets, which may be required if the transmitter adaptation rate is constrained by hardware limitations. Our modulation scheme exhibits a 5--10-dB power gain relative to variable-power fixed-rate transmission, and up to 20 dB of gain relative to nonadaptive transmission. We also determine the effect of channel estimation error and delay on the BER performance of our adaptive scheme. We conclude with a discussion of coding techniques and the relationship between our proposed modulation and Shannon capacity.

We apply coset codes to adaptive modulation in fading channels. Adaptive modulation is a powerful technique to improve the energy efficiency and increase the data rate over a fading channel. Coset codes are a natural choice to use with adaptive modulation since the channel coding and modulation designs are separable. Therefore, trellis and lattice codes designed for additive white Gaussian noise (AWGN) channels can be superimposed on adaptive modulation for fading channels, with the same approximate coding gains. We first describe the methodology for combining coset codes with a general class of adaptive modulation techniques. We then apply this methodology to a spectrally efficient adaptive M-ary quadrature amplitude modulation (MQAM) to obtain trellis-coded adaptive MQAM. We present analytical and simulation results for this design which show an effective coding gain of 3 dB relative to uncoded adaptive MQAM for a simple four-state trellis code, and an effective 3.6-dB coding gain for an eight-state trellis code. More complex trellis codes are shown to achieve higher gains. We also compare the performance of trellis-coded adaptive MQAM to that of coded modulation with built-in time diversity and fixed-rate modulation. The adaptive method exhibits a power savings of up to 20 dB.

Abstract—We examine adaptive modulation schemes for flatfading channels where the data rate, transmit power, and instantaneous BER are varied to maximize spectral efficiency, subject to an average power and BER constraint. Both continuous-rate and discrete-rate adaptation are considered, as well as average and instantaneous BER constraints. We find the general form of power, BER, and data rate adaptation that maximizes spectral efficiency for a large class of modulation techniques and fading distributions. The optimal adaptation of these parameters is to increase the power and data rate and decrease the BER as the channel quality improves. Surprisingly, little spectral efficiency is lost when the power or rate is constrained to be constant. Hence, the spectral efficiency of adaptive modulation is relatively insensitive to which degrees of freedom are adapted. Index Terms—Adaptive modulation, communication systems, fading channels, spectral efficiency. I.

Abstract — We study the problem of scheduling packet transmissions for data gathering in wireless sensor networks. The focus is to explore the energy-latency tradeoffs in wireless communication using techniques such as modulation scaling. The data aggregation tree – a multiple-source single-sink communication paradigm – is employed for abstracting the packet flow. We consider a real-time scenario where the data gathering must be performed within a specified latency constraint. We present algorithms to minimize the overall energy dissipation of the sensor nodes in the aggregation tree subject to the latency constraint. For the off-line problem, we propose (a) a numerical algorithm for the optimal solution, and (b) a pseudo-polynomial time approximation algorithm based on dynamic programming. We also discuss techniques for handling interference among the sensor nodes. Simulations have been conducted for both long-range communication and short-range communication. The simulation results show that compared with the classic shutdown technique, between 20 % to 90 % energy savings can be achieved by our techniques, under different settings of several key system parameters. We also develop an on-line distributed protocol that relies only on the local information available at each sensor node within the aggregation tree. Simulation results show that between 15 % to 90 % energy conservation can be achieved by the on-line protocol. The adaptability of the protocol with respect to variations in the packet size and latency constraint is also demonstrated through several run-time scenarios. Index terms – System design, Mathematical optimization I.

We first study the capacity of Nakagami multipath fading (NMF) channels with an average power constraint for three power and rate adaptation policies. We obtain closed-form solutions for NMF channel capacity for each power and rate adaptation strategy. Results show that rate adaptation is the key to increasing link spectral efficiency. We analyze therefore the performance of constant-power variable-rate M-QAM schemes over NMF channels. We obtain closed-form expressions for the outage probability, spectral efficiency and average bit-error-rate (BER) assuming perfect channel estimation and negligible time delay. We also analyze the impact of time delay on the BER of adaptive M-QAM. Keywords Link Spectral Efficiency, Adaptive Modulation Techniques, and Nakagami Fading. I. Introduction The radio spectrum available for wireless services is extremely scarce, while demand for these services is growing at a rapid pace [1]. Hence spectral efficiency is of primary concern in the design of fut...

We study the Shannon capacity of adaptive transmission techniques in conjunction with diversity combining. This capacity provides an upper bound on spectral efficiency using these techniques. We obtain closed-form solutions for the Rayleigh fading channel capacity under three adaptive policies: optimal power and rate adaptation, constant power with optimal rate adaptation, and channel inversion with fixed rate. Optimal power and rate adaptation yields a small increase in capacity over just rate adaptation, and this increase diminishes as the average received carrier-to-noise ratio (CNR) or the number of diversity branches increases. Channel inversion suffers the largest capacity penalty relative to the optimal technique, however, the penalty diminishes with increased diversity. Although diversity yields large capacity gains for all the techniques, the gain is most pronounced with channel inversion. For example, the capacity using channel inversion with two-branch diversity exceeds that of a single-branch system using optimal rate and power adaptation. Since channel inversion is the least complex scheme to implement, there is a tradeoff between complexity and capacity for the various adaptation methods and diversity-combining techniques.

Abstract—We developed a cross-layer design which combines adaptive modulation and coding at the physical layer with a truncated automatic repeat request protocol at the data link layer, in order to maximize spectral efficiency under prescribed delay and error performance constraints. We derive the achieved spectral efficiency in closed-form for transmissions over Nakagami- block fading channels. Numerical results reveal that retransmissions at the data link layer relieve stringent error control requirements at the physical layer, and thereby enable considerable spectral efficiency gain. This gain is comparable with that offered by diversity, provided that the maximum number of transmissions per packet equals the diversity order. Diminishing returns on spectral efficiency, that result when increasing the maximum number of retransmissions, suggest that a small number of retransmissions offers a desirable delay-throughput tradeoff, in practice. Index Terms—Adaptive modulation and coding (AMC), automatic repeat request (ARQ) protocol, cross-layer design, quality of service (QoS), wireless networks. I.

Adaptive modulation has the potential to increase the system throughput significantly by matching transmitter parameters to time-varying channel conditions. However, adaptive modulation schemes that rely on perfect channel state information (CSI) are sensitive to CSI imperfections induced by estimation errors and feedback delays. In this paper, we design adaptive modulation schemes for multi-antenna transmissions based on partial CSI, that models the spatial fading channels as Gaussian random variables with non-zero mean and white covariance, conditioned on feedback information. Based on a two-dimensional beamformer, our proposed transmitter optimally adapts the basis beams, the power allocation between two beams, and the signal constellation, to maximize the transmission rate, while maintaining a target bit error rate (BER). Adaptive trellis coded multi-antenna modulation is also investigated. Numerical results demonstrate the rate improvement, and illustrate an interesting tradeoff that emerges between feedback quality and hardware complexity.

Abstract — When adaptive modulation is used to counter short-term fading in mobile radio channels, signaling delays create problems with outdated channel state information. The use of channel power prediction will improve the performance of the link adaptation. It is then of interest to take the quality of these predictions into account explicitly when designing an adaptive modulation scheme. We study the optimum design of an adaptive modulation scheme based on uncoded M-QAM modulation assisted by channel prediction for the flat Rayleigh fading channel. The data rate, and in some variants the transmit power, are adapted to maximize the spectral efficiency subject to average power and bit error rate constraints. The key issues studied here are how a known prediction error variance will affect the optimized transmission properties such as the SNR boundaries that determine when to apply different modulation rates, and to what extent it affects the spectral efficiency. This investigation is performed by analytical optimization of the link adaptation, using the statistical properties of a particular but efficient channel power predictor. Optimum solutions for the rate and transmit power are derived based on the predicted SNR and the prediction error variance. I.