Wireless local area networks (W-LANs) have become increasingly popular due to the recent availability of affordable devices that are capable of communicating at high data rates. These high rates are possible, in part, through new modulation schemes that are optimized for the channel conditions bringing about a dramatic increase in bandwidth efficiency. Since the choice of which modulation scheme to use depends on the current state of the transmission channel, newer wireless devices often support multiple modulation schemes, and hence multiple data rates, with mechanisms to switch between them. Users are given the option to either select an operational data rate manually or to let the device automatically choose the appropriate modulation scheme (data rate) to match the prevailing conditions. Automatic rate selection protocols have been studied for cellular networks but there have been relatively few proposals for W-LANs. In this paper we present a rate adaptive MAC protocol called the Receiver-Based AutoRate (RBAR) protocol. The novelty of RBAR is that its rate adaptation mechanism is in the receiver instead of in the sender. This is in contrast to existing schemes in devices like the WaveLAN II [15]. We show that RBAR is better because it results in a more efficient channel quality estimation which is then reected in a higher overall throughput Our protocol is based on the RTS/CTS mechanism and consequently it can be incorporated into many medium access control protocols including the widely popular IEEE 802.11 protocol. Simulation results of an implementation of RBAR inside IEEE 802.11 show that RBAR performs consistently well.

this paper, we introduce a new variation on MAC protocols based on RTSCTS exchanges that is particularly attractive for ad-hoc networks. We call the new protocol FAMA-NCS (floor acquisition multiple access with non-persistent carrier sensing). The objective of FAMA-NCS is for a station that has data to send to acquire control of the channel in the vicinity of the receiver (which we call "the floor") before sending any data packet, and to ensure that no data packet collides with any other packet at the receiver

In ad hoc networks, the hidden- and the exposed-terminal problems can severely reduce the network capacity on the MAC layer. To address these problems, the ready-to-send and clear-to-send (RTS/CTS) dialogue has been proposed in the literature. However, MAC schemes using only the RTS/CTS dialogue cannot completely solve the hidden and the exposed terminal problems, as pure "packet sensing" MAC schemes are not safe even in fully connected networks. We propose a new MAC protocol, termed the dual busy tone multiple access (DBTMA) scheme. The operation of the DBTMA protocol is based on the RTS packet and two narrow-bandwidth, out-of-band busy tones. With the use of the RTS packet and the receive busy tone, which is set up by the receiver, our scheme completely solves the hidden- and the exposed-terminal problems. The busy tone, which is set up by the transmitter, provides protection for the RTS packets, increasing the probability of successful RTS reception and, consequently, increasing the throughput. This paper outlines the operation rules of the DBTMA scheme and analyzes its performance. Simulation results are also provided to support the analytical results. It is concluded that the DBTMA protocol is superior to other schemes that rely on the RTS/CTS dialogue on a single channel or to those that rely on a single busy tone. As a point of reference, the DBTMA scheme out-performs FAMA-NCS by 20--40% in our simulations using the network topologies borrowed from the FAMA-NCS paper. In an ad hoc network with a large coverage area, DBTMA achieves performance gain of 140% over FAMA-NCS and performance gain of 20% over RI-BTMA.

Abstract — Multiple access-based collision avoidance MAC protocols have typically used fixed transmission power, and have not considered power control mechanisms based on the distance of the transmitter and receiver in order to improve spatial channel reuse. This work proposes PCMA, a power controlled multiple access wireless MAC protocol within ¯ the collision avoid-ance framework. PCMA generalizes the transmit-or-defer “on/off ” collision avoidance model of current protocols to a more flexible “variable bounded power ” collision suppression model. The algorithm is provisioned for ad hoc networks and does not require the presence of base stations to manage transmission power (i.e. it is decentralized). The advantage of implementing a power controlled protocol in an ad-hoc network is that source-destination pairs can be more tightly packed into the network allowing a greater number of simultaneous transmissions (spectral reuse). Our initial simulation results show that the PCMA can improve the throughput performance of the non-power controlled IEEE 802.11 by a factor of 2 with potential for additional scalability as source destination pairs become more localized, thus providing a compelling reason for migrating to a new power controlled multiple access wireless MAC protocol standard.

Abstract. Wireless networking has witnessed an explosion of interest from consumers in recent years for its applications in mobile and personal communications. As wireless networks become an integral component of the modern communication infrastructure, energy efficiency will be an important design consideration due to the limited battery life of mobile terminals. Power conservation techniques are commonly used in the hardware design of such systems. Since the network interface is a significant consumer of power, considerable research has been devoted to low-power design of the entire network protocol stack of wireless networks in an effort to enhance energy efficiency. This paper presents a comprehensive summary of recent work addressing energy efficient and low-power design within all layers of the wireless network protocol stack.

We define and study capacity regions for wireless ad hoc networks with an arbitrary number of nodes and topology. These regions describe the set of achievable rate combinations between all source-destination pairs in the network under various transmission strategies, such as variable-rate transmission, single-hop or multihop routing, power control, and successive interference cancellation (SIC). Multihop cellular networks and networks with energy constraints are studied as special cases. With slight modifications, the developed formulation can handle node mobility and time-varying flat-fading channels. Numerical results indicate that multihop routing, the ability for concurrent transmissions, and SIC significantly increase the capacity of ad hoc and multihop cellular networks. On the other hand, gains from power control are significant only when variable-rate transmission is not used. Also, time-varying flat-fading and node mobility actually improve the capacity. Finally, multihop routing greatly improves the performance of energy-constraint networks.

Abstract not found

The floor acquisition multiple access (FAMA) discipline is analyzed in networks with hidden terminals. According to FAMA, control of the channel (the floor) is assigned to at most one station in the network at any given time, and this station is guaranteed to be able to transmit one or more data packets to different destinations with no collisions. The FAMA protocols described consist of nonpersistent carrier or packet sensing, plus a collision-avoidance dialogue between a source and the intended receiver of a packet. Sufficient conditions under which these protocols provide correct floor acquisition are presented and verified for networks with hidden terminals

This paper presents a power control MAC protocol that allows nodes to vary transmit power level on a per-packet basis. Several researchers have proposed simple modifications of IEEE 802.11 to incorporate power control. The main idea of these power control schemes is to use different power levels for RTS-CTS and DATA-ACK. Specifically, maximum transmit power is used for RTS-CTS, and the minimum required transmit power is used for DATA-ACK transmissions in order to save energy. However, we show that these schemes can degrade network throughput and can result in higher energy consumption than when using IEEE 802.11 without power control. We propose a power control protocol which does not degrade throughput and yields energy saving.

In this paper, we investigate the impact of radio irregularity on the communication performance in wireless sensor networks. Radio irregularity is a common phenomenon which arises from multiple factors, such as variance in RF sending power and different path losses depending on the direction of propagation. From our experiments, we discover that the variance in received signal strength is largely random; however, it exhibits a continuous change with incremental changes in direction. With empirical data obtained from the MICA2 platform, we establish a radio model for simulation, called the Radio Irregularity Model (RIM). This model is the first to bridge the discrepancy between spherical radio models used by simulators and the physical reality of radio signals. With this model, we are able to analyze the impact of radio irregularity on some of the well-known MAC and routing protocols. Our results show that radio irregularity has a significant impact on routing protocols, but a relatively small impact on MAC protocols. Finally, we propose six solutions to deal with radio irregularity. We evaluate two of them in detail. The results obtained from both the simulation and a running testbed demonstrate that our solutions greatly improve communication performance in the presence of radio irregularity.