Abstract—Motion blur due to camera motion can significantly degrade the quality of an image. Since the path of the camera motion can be arbitrary, deblurring of motion blurred images is a hard problem. Previous methods to deal with this problem have included blind restoration of motion blurred images, optical correction using stabilized lenses, and special CMOS sensors that limit the exposure time in the presence of motion. In this paper, we exploit the fundamental trade off between spatial resolution and temporal resolution to construct a hybrid camera that can measure its own motion during image integration. The acquired motion information is used to compute a point spread function (PSF) that represents the path of the camera during integration. This PSF is then used to deblur the image. To verify the feasibility of hybrid imaging for motion deblurring, we have implemented a prototype hybrid camera. This prototype system was evaluated in different indoor and outdoor scenes using long exposures and complex camera motion paths. The results show that, with minimal resources, hybrid imaging outperforms previous approaches to the motion blur problem. We conclude with a brief discussion on how our ideas can be extended beyond the case of global camera motion to the case where individual objects in the scene move with different velocities. Index Terms—Sharpening and deblurring, inverse filtering, motion, motion blur, point spread function, resolution, hybrid imaging. 1

Most of today's video and digital cameras use CCD image sensors, where the electric charge collected by the photodetector array during exposure time is serially shifted out of the sensor chip resulting in slow readout speed and high power consumption. Recently developed CMOS image sensors, by comparison, are read out non-destructively and in a manner similar to a digital memory and can thus be operated at very high frame rates. A CMOS image sensor can also be integrated with other camera functions on the same chip ultimately leading to a single-chip digital camera with very compact size, low power consumption and additional functionality. CMOS image sensors, however, generally su#er from lower dynamic range than CCDs due to their high read noise and non-uniformity. Moreover, as sensor design follows CMOS technology scaling, well capacity will continue to decrease, eventually resulting in unacceptably low SNR.

Motion blur due to camera motion can significantly degrade the quality of an image. Since the path of the camera motion can be arbitrary, deblurring of motion blurred images is a hard problem. Previous methods to deal with this problem have included blind restoration of motion blurred images, optical correction using stabilized lenses, and special CMOS sensors that limit the exposure time in the presence of motion.