Z-MAC is a hybrid MAC protocol for wireless sensor networks. It combines the strengths of TDMA and CSMA while offsetting their weaknesses. Nodes are assigned time slots using a distributed implementation of RAND. Unlike TDMA where a node is allowed to transmit only during its own assigned slots, a node can transmit in both its own time slots and slots assigned to other nodes. Owners of the current time slot always have priority in accessing the channel over non-owners. Therefore, under low contention where not all owners have data to send, non-owners can “steal ” time slots from owners. This has the effect of switching between CSMA and TDMA depending on contention. Z-MAC is robust to topology changes and clock synchronization errors; in the worst case its performance falls back to that of CSMA. We implemented Z-MAC in TinyOS and evaluated its channel utilization, energy, latency and fairness over single-hop, twohop and multi-hop sensor network topologies constructed using Mica2. The result shows that Z-MAC has remarkably better data throughput than existing sensor MAC protocols while consuming comparable energy (over three times better throughput under high contention).

Abstract — This paper argues for the usefulness of an application-cooperative interactive management system for wireless sensor networks, and presents SNMS, a Sensor Network Management System. SNMS is designed to be simple and have minimal impact on memory and network traffic, while remaining open and flexible. The system is evaluated in light of issues derived from real deployment experiences. I.

We present the design of the eXtreme Scale Mote, a new sensor network platform for reliably detecting and classifying, and quickly reporting, rare, random, and ephemeral events in a largescale, long-lived, and retaskable manner. This new mote was designed for the ExScal project which seeks to demonstrate a 10,000 node network capable of discriminating civilians, soldiers and vehicles, spread out over a 10km 2 area, with node lifetimes approaching 1,000 hours of continuous operation on two AA alkaline batteries. This application posed unique functional, usability, scalability, and robustness requirements which could not be met with existing hardware, and therefore motivated the design of a new platform. The detection and classification requirements are met using infrared, magnetic, and acoustic sensors. The infrared and acoustic sensors are designed for low-power continuous operation and include asynchronous processor wakeup circuitry. The usability and scalability requirements are met by minimizing the frequency and cost of human-in-the-loop operations during node deployment, activation, and verification through improvements in the user interface, packaging, and configurability of the platform. Recoverable retasking is addressed by using a grenade timer that periodically forces a system reset. The key contributions of this work are a specific design point and general design methods for building sensor network platforms to detect exceptional events. 1.

Recent technological advances and the continuing quest for greater efficiency have led to an explosion of link and network protocols for wireless sensor networks. These protocols embody very different assumptions about network stack composition and, as such, have limited interoperability. It has been suggested [3] that, in principle, wireless sensor networks would benefit from a unifying abstraction (or “narrow waist ” in architectural terms), and that this abstraction should be closer to the link level than the network level. This paper takes that vague principle and turns it into practice, by proposing a specific unifying sensornet protocol (SP) that provides shared neighbor management and a message pool. The two goals of a unifying abstraction are generality and efficiency: it should be capable of running over a broad range of link-layer technologies and supporting a wide variety of network protocols, and doing so should not lead to a significant loss of efficiency. To investigate the extent to which SP meets these goals, we implemented SP (in TinyOS) on top of two very different radio technologies: B-MAC on mica2 and IEEE 802.15.4 on Telos. We also built a variety of network protocols on SP, including examples of collection routing [53], dissemination [26], and aggregation [33]. Measurements show that these protocols do not sacrifice performance through the use of our SP abstraction.

In this paper we present X-MAC, a low power MAC protocol for wireless sensor networks (WSNs). Standard MAC protocols developed for duty-cycled WSNs such as B-MAC, which is the default MAC protocol for TinyOS, employ an extended preamble and preamble sampling. While this “low power listening ” approach is simple, asynchronous, and energy-efficient, the long preamble introduces excess latency at each hop, is suboptimal in terms of energy consumption, and suffers from excess energy consumption at nontarget receivers. X-MAC proposes solutions to each of these problems by employing a shortened preamble approach that retains the advantages of low power listening, namely low power communication, simplicity and a decoupling of transmitter and receiver sleep schedules. We demonstrate through implementation and evaluation in a wireless sensor testbed that X-MAC’s shortened preamble approach significantly reduces energy usage at both the transmitter and receiver, reduces per-hop latency, and offers additional advantages such as flexible adaptation to both bursty and periodic sensor data sources.

Project ExScal (for Extreme Scale) fielded a 1000+ node wireless sensor network and a 200+ node peer-to-peer ad hoc network of 802.11 devices in a 1.3km by 300m remote area in Florida, USA during December 2004. In comparison with previous deployments, the ExScal application is relatively complex and its networks are the largest ones of either type fielded to date. In this paper, we overview the key requirements of ExScal, the corresponding design of the hardware/software platform and application, and some results of our experiments.

Wireless networks are built upon a shared medium that makes it easy for adversaries to launch jamming-style attacks. These attacks can be easily accomplished by an adversary emitting radio frequency signals that do not follow an underlying MAC protocol. Jamming attacks can severely interfere with the normal operation of wireless networks and, consequently, mechanisms are needed that can cope with jamming attacks. In this paper, we examine radio interference attacks from both sides of the issue: first, we study the problem of conducting radio interference attacks on wireless networks, and second we examine the critical issue of diagnosing the presence of jamming attacks. Specifically, we propose four different jamming attack models that can be used by an adversary to disable the operation of a wireless network, and evaluate their effectiveness in terms of how

The traditional approach of providing network security has been to borrow tools from cryptography and authentication. However, we argue that the conventional view of security based on cryptography alone is not sufficient for the unique characteristics and novel misbehaviors encountered in sensor networks. Fundamental to this is the observation that cryptography cannot prevent malicious or non-malicious insertion of data from internal adversaries or faulty nodes. We believe that in general tools from different domains such as economics, statistics and data analysis will have to be combined with cryptography for the development of trustworthy sensor networks. Following this approach, we propose a reputation-based framework for sensor networks where nodes maintain reputation for other nodes and use it to evaluate their trustworthiness. We will show that this framework provides a scalable, diverse and a generalized approach for countering all types of misbehavior resulting from malicious and faulty nodes. We are currently developing a system within this framework where we employ a Bayesian formulation, specifically a beta reputation system, for reputation representation, updates and integration. We will explain the reasoning behind our design choices, analyzing their pros & cons. We conclude the paper by verifying the efficacy of this system through some preliminary simulation results.

Energy is a critical resource in sensor networks. MAC protocols such as S-MAC and T-MAC coordinate sleep schedules to reduce energy consumption. Recently, lowpower listening (LPL) approaches such as WiseMAC and B-MAC exploit very brief polling of channel activity combined with long preambles before each transmission, saving energy particularly during low network utilization. Synchronization cost, either explicitly in scheduling, or implicitly in long preambles, limits all these protocols to duty cycles of 1–2%. We demonstrate that ultra-low duty cycles of 0.1% and below are possible with a new MAC protocol called scheduled channel polling (SCP). This work prompts three new contributions: First, we establish optimal configurations for both LPL and SCP under fixed conditions, developing a lower bound of energy consumption. Under these conditions, SCP can extend lifetime of a network by a factor of 3–6 times over LPL. Second, SCP is designed to adapt well to variable traffic. LPL is optimized for known, periodic traffic, and long preambles become very costly when traffic varies. In one experiment, SCP reduces energy consumption by a factor of 10 under bursty traffic. We also show how SCP adapts to heavy traffic and streams data in multi-hop networks, reducing latency by 85 % and energy by 95 % at 9 hops. Finally, we show that SCP can operate effectively on recent hardware such as 802.15.4 radios. In fact, power consumption of SCP decreases with faster radios, but that of LPL increases.

This paper presents and evaluates two principles for wireless routing protocols. The first is datapath validation: data traffic quickly discovers and fixes routing inconsistencies. The second is adaptive beaconing: extending the Trickle algorithm to routing control traffic reduces route repair latency and sends fewer beacons. We evaluate datapath validation and adaptive beaconing in CTP Noe, a sensor network tree collection protocol. We use 12 different testbeds ranging in size from 20–310 nodes, comprising seven platforms, and six different link layers, on both interference-free and interference-prone channels. In all cases, CTP Noe delivers> 90 % of packets. Many experiments achieve 99.9%. Compared to standard beaconing, CTP Noe sends 73 % fewer beacons while reducing topology repair latency by 99.8%. Finally, when using low-power link layers, CTP Noe has duty cycles of 3 % while supporting aggregate loads of 30 packets/minute.