Results 1 - 10
of
166
Secure Positioning of Wireless Devices with Application to Sensor Networks
- IEEE INFOCOM
, 2005
"... So far, the problem of positioning in wireless networks has been mainly studied in a non-adversarial setting. In this work, we analyze the resistance of positioning techniques to position and distance spoofing attacks. We propose a mechanism for secure positioning of wireless devices, that we call ..."
Abstract
-
Cited by 90 (8 self)
- Add to MetaCart
So far, the problem of positioning in wireless networks has been mainly studied in a non-adversarial setting. In this work, we analyze the resistance of positioning techniques to position and distance spoofing attacks. We propose a mechanism for secure positioning of wireless devices, that we call Verifiable Multilateration. We then show how this mechanism can be used to secure positioning in sensor networks. We analyze our system through simulations.
Data collection, storage, and retrieval with an underwater sensor network
- In Proceedings of the International Conference on Embedded Networked Sensor Systems (ACM SenSys 2005
, 2005
"... In this paper we present a novel platform for underwater sensor networks to be used for long-term monitoring of coral reefs and fisheries. The sensor network consists of static and mobile underwater sensor nodes. The nodes communicate point-to-point using a novel high-speed optical communication sys ..."
Abstract
-
Cited by 57 (6 self)
- Add to MetaCart
In this paper we present a novel platform for underwater sensor networks to be used for long-term monitoring of coral reefs and fisheries. The sensor network consists of static and mobile underwater sensor nodes. The nodes communicate point-to-point using a novel high-speed optical communication system integrated into the TinyOS stack, and they broadcast using an acoustic protocol integrated in the TinyOS stack. The nodes have a variety of sensing capabilities, including cameras, water temperature, and pressure. The mobile nodes can locate and hover above the static nodes for data muling, and they can perform network maintenance functions such as deployment, relocation, and recovery. In this paper we describe the hardware and software architecture of this underwater sensor network. We then describe the optical and acoustic networking protocols and present experimental networking and data collected in a pool, in rivers, and in the ocean. Finally, we describe our experiments with mobility for data muling in this network.
A high-accuracy, low-cost localization system for wireless sensor networks
- In Proceedings of The Third ACM Conference on Embedded Networked Sensor Systems (SenSys
, 2005
"... The problem of localization of wireless sensor nodes has long been regarded as very difficult to solve, when considering the realities of real world environments. In this paper, we formally describe, design, implement and evaluate a novel localization system, called Spotlight. Our system uses the sp ..."
Abstract
-
Cited by 44 (14 self)
- Add to MetaCart
The problem of localization of wireless sensor nodes has long been regarded as very difficult to solve, when considering the realities of real world environments. In this paper, we formally describe, design, implement and evaluate a novel localization system, called Spotlight. Our system uses the spatio-temporal properties of well controlled events in the network (e.g., light), to obtain the locations of sensor nodes. We demonstrate that a high accuracy in localization can be achieved without the aid of expensive hardware on the sensor nodes, as required by other localization systems. We evaluate the performance of our system in deployments of Mica2 and XSM motes. Through performance evaluations of a real system deployed outdoors, we obtain a 20cm localization error. A sensor network, with any number of nodes, deployed in a 2500m 2 area, can be localized in under 10 minutes, using a device that costs less than $1000. To the best of our knowledge, this is the first report of a sub-meter localization error, obtained in an outdoor environment, without equipping the wireless sensor nodes with specialized ranging hardware.
Rendered Path: Range-Free Localization in Anisotropic Sensor Networks with Holes
, 2007
"... Sensor positioning is a crucial part of many location-dependent applications that utilize wireless sensor networks (WSNs). Current localization approaches can be divided into two groups: range-based and range-free. Due to the high costs and critical assumptions, the range-based schemes are often imp ..."
Abstract
-
Cited by 41 (11 self)
- Add to MetaCart
Sensor positioning is a crucial part of many location-dependent applications that utilize wireless sensor networks (WSNs). Current localization approaches can be divided into two groups: range-based and range-free. Due to the high costs and critical assumptions, the range-based schemes are often impractical for WSNs. The existing range-free schemes, on the other hand, suffer from poor accuracy and low scalability. Without the help of a large number of uniformly deployed seed nodes, those schemes fail in anisotropic WSNs with possible holes. To address this issue, we propose the Rendered Path (REP) protocol. To the best of our knowledge, REP is the only range-free protocol for locating sensors with constant number of seeds in anisotropic sensor networks.
Secure positioning in wireless networks
- IEEE Journal on Selected Areas in Communications
, 2006
"... Abstract—So far, the problem of positioning in wireless networks has been studied mainly in a nonadversarial setting. In this paper, we analyze the resistance of positioning techniques to position and distance spoofing attacks. We propose a mechanism for secure positioning of wireless devices, that ..."
Abstract
-
Cited by 39 (4 self)
- Add to MetaCart
Abstract—So far, the problem of positioning in wireless networks has been studied mainly in a nonadversarial setting. In this paper, we analyze the resistance of positioning techniques to position and distance spoofing attacks. We propose a mechanism for secure positioning of wireless devices, that we call verifiable multilateration. We then show how this mechanism can be used to secure positioning in sensor networks. We analyze our system through simulations. Index Terms—Ad hoc networks, positioning, secure protocols, security, sensor networks, wireless. I.
Network localization in partially localizable networks
- in Proceedings of IEEE INFOCOM
, 2005
"... Abstract — Knowing the positions of the nodes in a network is essential to many next generation pervasive and sensor network functionalities. Although many network localization systems have recently been proposed and evaluated, there has been no systematic study of partially localizable networks, i. ..."
Abstract
-
Cited by 35 (7 self)
- Add to MetaCart
Abstract — Knowing the positions of the nodes in a network is essential to many next generation pervasive and sensor network functionalities. Although many network localization systems have recently been proposed and evaluated, there has been no systematic study of partially localizable networks, i.e., networks in which there exist nodes whose positions cannot be uniquely determined. There is no existing study which correctly identifies precisely which nodes in a network are uniquely localizable and which are not. This absence of a sufficient uniqueness condition permits the computation of erroneous positions that may in turn lead applications to produce flawed results. In this paper, in addition to demonstrating the relevance of networks that may not be fully localizable, we design the first framework for two dimensional network localization with an efficient component to correctly determine which nodes are localizable and which are not. Implementing this system, we conduct comprehensive evaluations of network localizability, providing guidelines for both network design and deployment. Furthermore, we study an integration of traditional geographic routing with geographic routing over virtual coordinates in the partially localizable network setting. We show that this novel cross-layer integration yields good performance, and argue that such optimizations will be likely be necessary to ensure acceptable application performance in partially localizable networks. I.
The Sensor Selection Problem for Bounded Uncertainty Sensing Models
- IEEE Tran. Automation Science and Engineering
, 2005
"... We address the problem of selecting sensors so as to minimize the error in estimating the position of a target. We consider a generic sensor model where the measurements can be interpreted as polygonal, convex subsets of the plane. This model applies to a large class of sensors including cameras. We ..."
Abstract
-
Cited by 34 (1 self)
- Add to MetaCart
We address the problem of selecting sensors so as to minimize the error in estimating the position of a target. We consider a generic sensor model where the measurements can be interpreted as polygonal, convex subsets of the plane. This model applies to a large class of sensors including cameras. We present an approximation algorithm which guarantees that the resulting error in estimation is within a factor 2 of the least possible error. In establishing this result, we formally prove that a constant number of sensors suffice for a good estimate -- an observation made by many researchers. In the second part of the paper, we study the scenario where the target's position is given by an uncertainty region and present algorithms for both probabilistic and online versions of this problem.
A Theory of Network Localization
, 2004
"... In this paper we provide a theoretical foundation for the problem of network localization in which some nodes know their locations and other nodes determine their locations by measuring the distances to their neighbors. We construct grounded graphs to model network localization and apply graph rigid ..."
Abstract
-
Cited by 34 (2 self)
- Add to MetaCart
In this paper we provide a theoretical foundation for the problem of network localization in which some nodes know their locations and other nodes determine their locations by measuring the distances to their neighbors. We construct grounded graphs to model network localization and apply graph rigidity theory to test the conditions for unique localizability and to construct uniquely localizable networks. We further study the computational complexity of network localization and investigate a subclass of grounded graphs where localization can be computed efficiently. We conclude with a discussion of localization in sensor networks where the sensors are placed randomly.
Consensus and collision detectors in wireless ad hoc networks
- In PODC
, 2005
"... Abstract In this study, we consider the fault-tolerant consensus problem in wireless ad hoc networks with crashprone nodes. Specifically, we develop lower bounds and matching upper bounds for this problem in single-hop wireless networks, where all nodes are located within broadcast range of each oth ..."
Abstract
-
Cited by 33 (14 self)
- Add to MetaCart
Abstract In this study, we consider the fault-tolerant consensus problem in wireless ad hoc networks with crashprone nodes. Specifically, we develop lower bounds and matching upper bounds for this problem in single-hop wireless networks, where all nodes are located within broadcast range of each other. In a novel break from existing work, we introduce a highly unpredictable communication model in which each node may lose an arbitrary subset of the messages sent by its neighbors during each round. We argue that this model better matches behavior observed in empirical studies of these networks. To cope with this communication unreliability we augment nodes with receiver-side collision detectors and present a new classification of these detectors in terms of accuracy and completeness. This classification is motivated by practical realities and allows us to determine, roughly speaking, how much collision detection capability is enough to solve the consensus problem efficiently in this setting. We consider ten different combinations of completeness and accuracy properties in total, determining for each whether consensus is solvable, and, if it is, a lower bound on the number of rounds required. Furthermore, we distinguish anonymous and non-anonymous protocols--where "anonymous " implies that devices do not have unique identifiers--determining what effect (if any) this extra information has on the complexity of the problem. In all relevant cases, we provide matching upper bounds. Our contention is that the introduction of (possibly weak) receiver-side collision detection is an important approach to reliably solving problems in unreliable networks. Our results, derived in a realistic network model, provide important feedback to ad hoc network practitioners regarding what hardware (and low-layer software) collision detection capability is sufficient to facilitate the construction of reliable and fault-tolerant agreement protocols for use in real-world deployments.
Mobile-assisted localization in wireless sensor networks
- In Proceedings of IEEE INFOCOM ’05
, 2005
"... Abstract — The localization problem is to determine an assignment of coordinates to nodes in a wireless ad-hoc or sensor network that is consistent with measured pairwise node distances. Most previously proposed solutions to this problem assume that the nodes can obtain pairwise distances to other n ..."
Abstract
-
Cited by 33 (2 self)
- Add to MetaCart
Abstract — The localization problem is to determine an assignment of coordinates to nodes in a wireless ad-hoc or sensor network that is consistent with measured pairwise node distances. Most previously proposed solutions to this problem assume that the nodes can obtain pairwise distances to other nearby nodes using some ranging technology. However, for a variety of reasons that include obstructions and lack of reliable omnidirectional ranging, this distance information is hard to obtain in practice. Even when pairwise distances between nearby nodes are known, there may not be enough information to solve the problem uniquely. This paper describes MAL, a mobile-assisted localization method which employs a mobile user to assist in measuring distances between node pairs until these distance constraints form a “globally rigid ” structure that guarantees a unique localization. We derive the required constraints on the mobile’s movement and the minimum number of measurements it must collect; these constraints depend on the number of nodes visible to the mobile in a given region. We show how to guide the mobile’s movement to gather a sufficient number of distance samples for node localization. We use simulations and measurements from an indoor deployment using the Cricket location system to investigate the performance of MAL, finding in real-world experiments that MAL’s median pairwise distance error is less than 1.5 % of the true node distance. I.

