The various arguments for introducing optical interconnections to silicon CMOS chips are summarized, and the challenges for optical, optoelectronic, and integration technologies are discussed. Optics could solve many physical problems of interconnects, including precise clock distribution, system synchronization (allowing larger synchronous zones, both on-chip and between chips), bandwidth and density of long interconnections, and reduction of power dissipation. Optics may relieve a broad range of design problems, such as crosstalk, voltage isolation, wave reflection, impedance matching, and pin inductance. It may allow continued scaling of existing architectures and enable novel highly interconnected or high-bandwidth architectures. No physical breakthrough is required to implement dense optical interconnects to silicon chips, though substantial technological work remains. Cost is a significant barrier to practical introduction, though revolutionary approaches exist that might achieve economies of scale. An Appendix analyzes scaling of on-chip global electrical interconnects, including line inductance and the skin effect, both of which impose significant additional constraints on future interconnects. Keywords—Off-chip wiring, on-chip wiring, optical interconnects, quantum-well modulator, vertical-cavity surface-emitting laser. I.

Technologies now exist for implementing dense surface-normal optical interconnections for silicon CMOS VLSI using hybrid integration techniques. The critical factors in determining the performance of the resulting photonic chip are the yield on the transceiver device arrays, the sensitivity and power dissipation of the receiver and transmitter circuits, and the total optical power budget available. The use of GaAs--AlGaAs multiple-quantum-well p-i-n diodes for on-chip detection and modulation is one effective means of implementing the optoelectronic transceivers. We discuss a potential roadmap for the scaling of this hybrid optoelectronic VLSI technology as CMOS linewidths shrink and the characteristics of the hybrid optoelectronic tranceiver technology improve. An important general conclusion is that, unlike electrical interconnects, such dense optical interconnections directly to an electronic circuit will likely be able to scale in capacity to match the improved performance of futur...

...................................................................................................................................... viii List of publications .......................................................................................................................ix Chapter 1: Introduction..................................................................................................................1 1.1 Scope and overall research contribution..............................................................................1 1.2 Motivation............................................................................................................................2 1.2.1 The interconnect problem .............................................................................................2 1.2.2 Capabilities and limitations of electrical interconnects................................................4 1.2.3 Advantages of optical interconnects ......................................