This paper proposes S-MAC, a medium-access control (MAC) protocol designed for wireless sensor networks. Wireless sensor networks use battery-operated computing and sensing devices. A network of these devices will collaborate for a common application such as environmental monitoring. We expect sensor networks to be deployed in an ad hoc fashion, with individual nodes remaining largely inactive for long periods of time, but then becoming suddenly active when something is detected. These characteristics of sensor networks and applications motivate a MAC that is different from traditional wireless MACs such as IEEE 802.11 in almost every way: energy conservation and self-configuration are primary goals, while per-node fairness and latency are less important. S-MAC uses three novel techniques to reduce energy consumption and support self-configuration. To reduce energy consumption in listening to an idle channel, nodes periodically sleep. Neighboring nodes form virtual clusters to auto-synchronize on sleep schedules. Inspired by PAMAS, S-MAC also sets the radio to sleep during transmissions of other nodes. Unlike PAMAS, it only uses in-channel signaling. Finally, S-MAC applies message passing to reduce contention latency for sensor-network applications that require store-andforward processing as data move through the network. We evaluate our implementation of S-MAC over a sample sensor node, the Mote, developed at University of California, Berkeley. The experiment results show that, on a source node, an 802.11-like MAC consumes 2--6 times more energy than S-MAC for traffic load with messages sent every 1-10s.

We introduce a geographical adaptive fidelity (GAF) algorithm that reduces energy consumption in ad hoc wireless networks. GAF conserves energy by identifying nodes that are equivalent from a routing perspective and then turning off unnecessary nodes, keeping a constant level of routing fidelity. GAF moderates this policy using application- and system-level information; nodes that source or sink data remain on and intermediate nodes monitor and balance energy use. GAF is independent of the underlying ad hoc routing protocol; we simulate GAF over unmodified AODV and DSR. Analysis and simulation studies of GAF show that it can consume 40% to 60% less energy than an unmodified ad hoc routing protocol. Moreover, simulations of GAF suggest that network lifetime increases proportionally to node density; in one example, a four-fold increase in node density leads to network lifetime increase for 3 to 6 times (depending on the mobility pattern). More generally, GAF is an example of adaptive fidelity, a technique proposed for extending the lifetime of self-configuring systems by exploiting redundancy to conserve energy while maintaining application fidelity.

Advances in processor, memory and radio technology will enable small and cheap nodes capable of sensing, communication and computation. Networks of such nodes can coordinate to perform distributed sensing of environmental phenomena. In this paper, we explore the directed diffusion paradigm for such coordination. Directed diffusion is datacentric in that all communication is for named data. All nodes in a directed diffusion-based network are application-aware. This enables diffusion to achieve energy savings by selecting empirically good paths and by caching and processing data in-network (e.g., data aggregation). We explore and evaluate the use of directed diffusion for a simple remote-surveillance sensor network analytically and experimentally. Our evaluation indicates that directed diffusion can achieve significant energy savings and can outperform idealized traditional schemes (e.g., omniscient multicast) under the investigated scenarios.

This paper proposes S-MAC, a medium access control (MAC) protocol designed for wireless sensor networks. Wireless sensor networks use battery-operated computing and sensing devices. A network of these devices will collaborate for a common application such as environmental monitoring. We expect sensor networks to be deployed in an ad hoc fashion, with nodes remaining largely inactive for long time, but becoming suddenly active when something is detected. These characteristics of sensor networks and applications motivate a MAC that is different from traditional wireless MACs such as IEEE 802.11 in several ways: energy conservation and self-configuration are primary goals, while per-node fairness and latency are less important. S-MAC uses a few novel techniques to reduce energy consumption and support self-configuration. It enables low-duty-cycle operation in a multihop network. Nodes form virtual clusters based on common sleep schedules to reduce control overhead and enable traffic-adaptive wake-up. S-MAC uses in-channel signaling to avoid overhearing unnecessary traffic. Finally, S-MAC applies message passing to reduce contention latency for applications that require in-network data processing. The paper presents measurement results of S-MAC performance on a sample sensor node, the UC Berkeley Mote, and reveals fundamental tradeoffs on energy, latency and throughput. Results show that S-MAC obtains significant energy savings compared with an 802.11-like MAC without sleeping.

Advances in microsensor and radio technology will enable small but smart sensors to be deployed for a wide range of environmental monitoring applications. The low per-node cost will allow these wireless networks of sensors and actuators to be densely distributed. The nodes in these dense networks will coordinate to perform the distributed sensing and actuation tasks. Moreover, as described in this paper, the nodes can also coordinate to exploit the redundancy provided by high density so as to extend overall system lifetime. The large number of nodes deployed in these systems will preclude manual configuration, and the environmental dynamics will preclude design-time preconfiguration. Therefore, nodes will have to self-configure to establish a topology that provides communication under stringent energy constraints. ASCENT builds on the notion that, as density increases, only a subset of the nodes are necessary to establish a routing forwarding backbone. In ASCENT, each node assesses its connectivity and adapts its participation in the multihop network topology based on the measured operating region. This paper motivates and describes the ASCENT algorithm and presents analysis, simulation, and experimental measurements. We show that the system achieves linear increase in energy savings as a function of the density and the convergence time required in case of node failures while still providing adequate connectivity.

Hardware for sensor nodes that combine physical sensors, actuators, embedded processors, and communication components has advanced significantly over the last decade, and made the large-scale deployment of such sensors a reality. Applications range from monitoring applications such as inventory maintenance over health care to military applications.

The widespread distribution and availability of smallscale sensors, actuators, and embedded processors is transforming the physical world into a computing platform. One such example is a sensor network consisting of a large number of sensor nodes that combine physical sensing capabilities such as temperature, light, or seismic sensors with networking and computation capabilities. Applications range from environmental control, warehouse inventory, and health care to military environments. Existing sensor networks assume that the sensors are preprogrammed and send data to a central frontend where the data is aggregated and stored for offline querying and analysis. This approach has two major drawbacks. First, the user cannot change the behavior of the system on the fly. Second, conservation of battery power is a major design factor, but a central system cannot make use of in-network programming, which trades costly communication for cheap local computation.

In most distributed systems, naming of nodes for low-level communication leverages topological location (such as node addresses) and is independent of any application. In this paper, we investigate an emerging class of distributed systems where low-level communication does not rely on network topological location. Rather, low-level communication is based on attributes that are external to the network topology and relevant to the application. When combined with dense deployment of nodes, this kind of named data enables in-network processing for data aggregation, collaborative signal processing, and similar problems. These approaches are essential for emerging applications such as sensor networks where resources such as bandwidth and energy are limited. This paper is the first description of the software architecture that supports named data and in-network processing in an operational, multi-application sensor-network. We show that approaches such as in-network aggregation and nested queries can significantly affect network traffic. In one experiment aggregation reduces traffic by up to 42% and nested queries reduce loss rates by 30%. Although aggregation has been previously studied in simulation, this paper demonstrates nested queries as another form of in-network processing, and it presents the first evaluation of these approaches over an operational testbed.

Abstract-- Wireless sensor networks have emerged recently as an effective way of monitoring remote or inhospitable physical environments. One of the major challenges in devising such networks lies in the constrained energy and computational resources available to sensor nodes. These constraints must be taken into account at all levels of system hierarchy. The deployment of sensor nodes is the first step in establishing a sensor network. Since sensor networks contain a large number of sensor nodes, the nodes must be deployed in clusters, where the location of each particular node cannot be fully guaranteed a priori. Therefore, the number of nodes that must be deployed in order to completely cover the whole monitored area is often higher than if a deterministic procedure were used. In networks with stochastically placed nodes, activating only the necessary number of sensor nodes at any particular moment can save energy. We introduce a heuristic that selects mutually exclusive sets of sensor nodes, where the members of each of those sets together completely cover the monitored area. The intervals of activity are the same for all sets, and only one of the sets is active at any time. The experimental results demonstrate that by using only a subset of sensor nodes at each moment, we achieve a significant energy savings while fully preserving coverage. I.

... This paper examines this emerging field to classify wireless micro-sensor networks according to different communication functions, data delivery models, and network dynamics. This taxonomy will aid in defining appropriate communication infrastructures for different sensor network application sub-spaces, allowing network designers to choose the protocol architecture that best matches the goals of their application. In addition, this taxonomy will enable new sensor network models to be defined for use in further research in this area.