The Iterative Closest Point (ICP) algorithm is a widely used method for aligning three-dimensional point sets. The quality of alignment obtained by this algorithm depends heavily on choosing good pairs of corresponding points in the two datasets. If too many points are chosen from featureless regions of the data, the algorithm converges slowly, finds the wrong pose, or even diverges, especially in the presence of noise or miscalibration in the input data. In this paper, we describe a method for detecting uncertainty in pose, and we propose a point selection strategy for ICP that minimizes this uncertainty by choosing samples that constrain potentially unstable transformations.

An active contour model for parametric curve and surface approximation is presented. The active curve or surface adapts to the model shape to be approximated in an optimization algorithm. The quasi-Newton optimization procedure in each iteration step minimizes a quadratic function which is built up with help of local quadratic approximants of the squared distance function of the model shape and an internal energy which has a smoothing and regularization effect. The approach completely avoids the parametrization problem. We also show how to use a similar strategy for the solution of variational problems for curves on surfaces. Examples are the geodesic path connecting two points on a surface and interpolating or approximating spline curves on surfaces. Finally we indicate how the latter topic leads to the variational design of smooth motions which interpolate or approximate given positions. 1.

We propose a framework for pairwise registration of shapes represented by point cloud data (PCD). We assume that the points are sampled from a surface and formulate the problem of aligning two PCDs as a minimization of the squared distance between the underlying surfaces. Local quadratic approximants of the squared distance function are used to develop a linear system whose solution gives the best aligning rigid transform for the given pair of point clouds. The rigid transform is applied and the linear system corresponding to the new orientation is build. This process is iterated until it converges. The point-to-point and the point-to-plane Iterated Closest Point (ICP) algorithms can be treated as special cases in this framework. Our algorithm can align PCDs even when they are placed far apart, and is experimentally found to be more stable than point-to-plane ICP. We analyze the convergence behavior of our algorithm and of point-to-point and point-to-plane ICP under our proposed framework, and derive bounds on their rate of convergence. We compare the stability and convergence properties of our algorithm with other registration algorithms on a variety of scanned data.

Abstract not found

Computing a curve to approximate data points is a problem encountered frequently in many applications in computer graphics, computer vision, CAD/CAM, and image processing. We present a novel and efficient method, called squared distance minimization (SDM), for computing a planar B-spline curve, closed or open, to approximate a target shape defined by a point cloud, i.e., a set of unorganized, possibly noisy data points. We show that SDM outperforms significantly other optimization methods used currently in common practice of curve fitting. In SDM a B-spline curve starts from some properly specified initial shape and converges towards the target shape through iterative quadratic minimization of the fitting error. Our contribution is the introduction of a new fitting error term, called the squared distance (SD) error term, defined by a quadratic approximant of squared distances from data points to a fitting curve. The SD

In this paper, we describe a system for the reconstruction of deforming geometry from a time sequence of unstructured, noisy point clouds, as produced by recent real-time range scanning devices. Our technique reconstructs both the geometry and dense correspondences over time. Using the correspondences, holes due to occlusion are filled in from other frames. Our reconstruction technique is based on a statistical framework: The reconstruction should both match the measured data points and maximize prior probability densities that prefer smoothness, rigid deformation and smooth movements over time. The optimization procedure consists of an inner loop that optimizes the 4D shape using continuous numerical optimization and an outer loop that infers the discrete 4D topology of the data set using an iterative model assembly algorithm. We apply the technique to a variety of data sets, demonstrating that the new approach is capable of robustly retrieving animated models with correspondences from data sets suffering from significant noise, outliers and acquisition holes.

We study the reconstruction of smooth surfaces from point clouds. We use a new squared distance error term in optimization to fit a subdivision surface to a set of unorganized points, which defines a closed target surface of arbitrary topology. The resulting method is based on the framework of squared distance minimization (SDM) proposed by Pottmann et al. Specifically, with an initial subdivision surface having a coarse control mesh as input, we adjust the control points by optimizing an objective function through iterative minimization of a quadratic approximant of the squared distance function of the target shape. Our experiments show that the new method (SDM) converges much faster than the commonly used optimization method using the point distance error function, which is known to have only linear convergence. This observation is further supported by our recent result that SDM can be derived from the Newton method with necessary modifications to make the Hessian positive definite and the fact that the Newton method has quadratic convergence.

We present a new approach to the geometric alignment of a point cloud to a surface and to related registration problems. The standard algorithm is the familiar ICP algorithm. Here we provide an alternative concept which relies on instantaneous kinematics and on the geometry of the squared distance function of a surface. The proposed algorithm exhibits faster convergence than ICP

Abstract. The performance of face recognition systems that use twodimensional images is dependent on consistent conditions such as lighting, pose, and facial appearance. We are developing a face recognition system that uses three-dimensional depth information to make the system more robust to these arbitrary conditions. We have developed a face matching system that automatically correlates points in three dimensions between two 2.5D range images of different views. A hybrid Iterative Closest Point (ICP) scheme is proposed to integrate two classical ICP algorithms for fine registration of the two scans. A robust similarity metric is defined for matching purpose. Results are provided on a preliminary database of 10 subjects (one training image per subject) containing frontal face images of neutral expression with a testing database of 63 scans that varied in pose, expression and lighting. 1.

Computing a curve to approximate data points is a problem encountered frequently in many applications in computer graphics, computer vision, CAD/CAM, and image processing. We present a novel and efficient method, called squared distance minimization (SDM), for computing a planar B-spline curve, closed or open, to approximate a target shape defined by a point cloud, that is, a set of unorganized, possibly noisy data points. We show that SDM significantly outperforms other optimization methods used currently in common practice of curve fitting. In SDM, a B-spline curve starts from some properly specified initial shape and converges towards the target shape through iterative quadratic minimization of the fitting error. Our contribution is the introduction of a new fitting error term, called the squared distance (SD) error term, defined by a curvature-based quadratic approximant of squared distances from data points to a fitting curve. The SD error term faithfully measures the geometric distance between a fitting curve and a target shape, thus leading to faster and more stable convergence than the point distance (PD) error term, which is commonly used in computer graphics and CAGD, and the tangent distance (TD) error term, which is often adopted in the computer vision community. To provide a theoretical explanation of the superior performance of SDM, we formulate the B-spline curve fitting problem as a nonlinear least squares problem and conclude that SDM is a quasi-Newton method which employs a curvature-based positive definite approximant to the true Hessian of the objective function. Furthermore, we show that the method based on the TD error term is a Gauss-Newton iteration, which is unstable for target shapes with high curvature variations, whereas optimization based on the PD error term is the alternating method that is known to have linear convergence.