We present a framework for differential modulation with multiple antennas across a continuously fading channel, where neither the transmitter nor the receiver knows the fading coefficients. The framework can be seen as a natural extension of standard differential phase shift keying (DPSK) commonly used in single-antenna unknown-channel systems. We show how our differential framework links the unknown-channel system with a known-channel system, and we develop performance design criteria. As a special case, we introduce a class of diagonal signals where only one antenna is active at any time, and demonstrate how these signals may be used to achieve full transmitter diversity and low probability of error. Index Terms---Multi-element antenna arrays, wireless communications, fading channels, transmitter diversity, receiver diversity 1 Introduction Recent advances in communicating across multiple-antenna wireless communication links show that these links can support very high data rates w...

Cooperative diversity is a transmission technique where multiple terminals pool their resources to form a virtual antenna array that realizes spatial diversity gain in a distributed fashion. In this paper, we examine the basic building block of cooperative diversity systems, a simple fading relay channel where the source, destination and relay terminals are each equipped with single antenna transceivers. We consider three different TDMA-based cooperative protocols that vary the degree of broadcasting and receive collision. The relay terminal operates in either the amplify-and-forward (AF) or decode-and-forward (DF) modes. For each protocol, we study the ergodic and outage capacity behavior (assuming Gaussian code books) under the AF and DF modes of relaying. We analyze the spatial diversity performance of the various protocols and find that full spatial diversity (second-order in this case) is achieved by certain protocols provided that appropriate power control is employed. Our analysis unifies previous results reported in the literature and establishes the superiority (both from a capacity as well as a diversity point-of-view) of a new protocol proposed in this paper. The second part of the paper is devoted to (distributed) space-time code design for fading relay channels operating in the AF mode. We show that the corresponding code design criteria consist of the traditional rank and determinant criteria for the case of co-located antennas as well as appropriate power control rules. Consequently space-time codes designed for the case of co-located multi-antenna channels can be used to realize cooperative diversity provided that appropriate power control is employed.

In this paper, we study the capacity of multiple-antenna fading channels. We focus on the scenario where the fading coefficients vary quickly; thus an accurate estimation of the coefficients is generally not available to either the transmitter or the receiver. We use a noncoherent block fading model proposed by Marzetta and Hochwald. The model does not assume any channel side information at the receiver or at the transmitter, but assumes that the coefficients remain constant for a coherence interval of length symbol periods. We compute the asymptotic capacity of this channel at high signal-to-noise ratio (SNR) in terms of the coherence time , the number of transmit antennas , and the number of receive antennas . While the capacity gain of the coherent multiple antenna channel is min bits per second per hertz for every 3-dB increase in SNR, the corresponding gain for the noncoherent channel turns out to be (1 ) bits per second per herz, where = min 2 . The capacity expression has a geometric interpretation as sphere packing in the Grassmann manifold.

We propose a systematic method for creating constellations of unitary space–time signals for multiple-antenna communication links. Unitary space–time signals, which are orthonormal in time across the antennas, have been shown to be well-tailored to a Rayleigh fading channel where neither the transmitter nor the receiver knows the fading coefficients. The signals can achieve low probability of error by exploiting multiple-antenna diversity. Because the fading coefficients are not known, the criterion for creating and evaluating the constellation is nonstandard and differs markedly from the familiar maximum-Euclidean-distance norm. Our construction begins with the first signal in the constellation—an oblong complex-valued matrix whose columns are orthonormal—and systematically produces the remaining signals by successively rotating this signal in a high-dimensional complex space. This construction easily produces large constellations of high-dimensional signals. We demonstrate its efficacy through examples involving one, two, and three transmitter antennas.

Abstract — We study communication networks of arbitrary size and topology and communicating over a general vector discrete memoryless channel. We propose an information-theoretic constructive scheme for obtaining an achievable rate region in such networks. Many well-known capacity-defining achievable rate regions can be derived as special cases of the proposed scheme. A few such examples are the physically degraded and reverselydegraded relay channels, the Gaussian multiple-access channel, and the Gaussian broadcast channel. The proposed scheme also leads to inner bounds for the multicast and allcast capacities. Applying the proposed scheme to a specific wireless network   of nodes located in a region of unit area, we show that a transport capacity of ¡£ ¢ bit-meters/sec is feasible in a certain family of networks, as compared to the best possible transport capacity ¡£¢§ ¦   ¨ ¤ of bit-meters/sec in [16] where the receiver capabilities were limited. Even though the improvement is shown for a specific class of networks, a clear implication is that designing and employing more sophisticated multi-user coding schemes can provide sizable gains in at least some large wireless networks. Index Terms — Discrete memoryless channels, Gaussian channels, multiuser communications, network information theory,

This paper presents an overview of recent progress in the area of multiple-input–multiple-output (MIMO) space–time coded wireless systems. After some background on the research leading to the discovery of the enormous potential of MIMO wireless links, we highlight the different classes of techniques and algorithms proposed which attempt to realize the various benefits of MIMO including spatial multiplexing and space–time coding schemes. These algorithms are often derived and analyzed under ideal independent fading conditions. We present the state of the art in channel modeling and measurements, leading to a better understanding of actual MIMO gains. Finally, the paper addresses current questions regarding the integration of MIMO links in practical wireless systems and standards.

We provide an overview of the extensive recent results on the Shannon capacity of single-user and multiuser multiple-input multiple-output (MIMO) channels. Although enormous capacity gains have been predicted for such channels, these predictions are based on somewhat unrealistic assumptions about the underlying time-varying channel model and how well it can be tracked at the receiver, as well as at the transmitter. More realistic assumptions can dramatically impact the potential capacity gains of MIMO techniques. For time-varying MIMO channels there are multiple Shannon theoretic capacity definitions and, for each definition, different correlation models and channel information assumptions that we consider. We first provide a comprehensive summary of ergodic and capacity versus outage results for single-user MIMO channels. These results indicate that the capacity gain obtained from multiple antennas heavily depends

We derive performance limits for two closely related communication scenarios involving a wireless system with multiple-element transmitter antenna arrays: a point-to-point system with partial side information at the transmitter, and a broadcast system with multiple receivers. In both cases, ideal beamforming is impossible, leading to an inherently lower achievable performance as the quality of the side information degrades or as the number of receivers increases. Expected signal-tonoise ratio (SNR) and mutual information are both considered as performance measures. In the point-to-point case, we determine when the transmission strategy should use some form of beamforming and when it should not. We also show that, when properly chosen, even a small amount of side information can be quite valuable. For the broadcast scenario with an SNR criterion, we find the efficient frontier of operating points and show that even when the number of receivers is larger than the number of antenna array ...

this paper, we show how to design signal matrices satisfying these requirements. As shown in [1], the design problem for unitary space time constellations is the following: let

A universal framework is developed for constructing full-rate and full-diversity coherent space--time codes for systems with arbitrary numbers of transmit and receive antennas. The proposed framework combines space--time layering concepts with algebraic component codes optimized for single-input--single-output (SISO) channels. Each component code is assigned to a "thread" in the space--time matrix, allowing it thus full access to the channel spatial diversity in the absence of the other threads. Diophantine approximation theory is then used in order to make the different threads "transparent" to each other. Within this framework, a special class of signals which uses algebraic number-theoretic constellations as component codes is thoroughly investigated. The lattice structure of the proposed number-theoretic codes along with their minimal delay allow for polynomial complexity maximum-likelihood (ML) decoding using algorithms from lattice theory. Combining the design framework with the Cayley transform allows to construct full diversity differential and noncoherent space--time codes. The proposed framework subsumes many of the existing codes in the literature, extends naturally to time-selective and frequency -selective channels, and allows for more flexibility in the tradeoff between power efficiency, bandwidth efficiency, and receiver complexity. Simulation results that demonstrate the significant gains offered by the proposed codes are presented in certain representative scenarios.