### Table 2. Exemplary numerical results corresponding to CAC calculation, assumed link capacity C=100 Mbps

"... In PAGE 6: ... In fact, for TCP Reno setting IPLR on that level does not degrade the TCP throughput comparing with setting IPLR on the value close to 0. Table2 and Table 3 contain the exemplary numerical results corresponding to the verification of the CAC formula. Table 2 corresponds to CAC calculation while Table 3 corresponds to the verification by simulation.... In PAGE 6: ... Table 2 and Table 3 contain the exemplary numerical results corresponding to the verification of the CAC formula. Table2 corresponds to CAC calculation while Table 3 corresponds to the verification by simulation. For CAC calculation, as the input data are: buffer size B, packet loss ratio IPLR and the rate requested by each of the TCP connections.... ..."

### Table 1 presents exemplary results of calculations concerning the operation of a heat-and- power unit with an average value of electric power of about 66 MW and heat power of about 19 MW. The calculated consumption of the chemical energy of fuels is essentially influenced by the results of measurement of the flux and parameters of feed water and live stem from the boiler. These measurements also considerably influence to satisfy equations of the substance and energy balances of the turbine and heat exchanger.

"... In PAGE 6: ...Table1 . Exemplary results of calculations concerning the work of a heat-and-power unit No.... ..."

### Table 1: Calculation results of the simulation runs

"... In PAGE 35: ... The successful application of Modelica on vehicle level is underlined by some exemplary calculation results. Table1 shows the consumed energy of a vehicle with the following main parameters (mass approx. 1200 to 1300 kg, depends on degree of hybridisation; cw A = 0:6; rolling resistance = 0.... ..."

### Table 3. Exemplary numerical results corresponding to CAC verification by simulation, assumed link capacity C=100 Mbps

"... In PAGE 6: ... In fact, for TCP Reno setting IPLR on that level does not degrade the TCP throughput comparing with setting IPLR on the value close to 0. Table 2 and Table3 contain the exemplary numerical results corresponding to the verification of the CAC formula. Table 2 corresponds to CAC calculation while Table 3 corresponds to the verification by simulation.... In PAGE 7: ...The results presented in Table3 confirm our expectation about applied CAC function. For all considered exemplary cases, the received TCP throughput was exactly the same as the requested one.... In PAGE 7: ... For all considered exemplary cases, the received TCP throughput was exactly the same as the requested one. 4 Assigning shaping rates The exemplary numerical results referring to the verification of the assumed CAC function and presented in Table3 were obtained for the case when the shaping rates are the same for each of running TCP connections under CAC limit. The simplest way, say scheme #1, for achieving the above is that for every new connection we set the shaping rate at the value corresponding to the CAC limit conditions, e.... ..."

### Table 5: Exemplary results

1999

"... In PAGE 5: ... 2There seems to be no corresponding path preposition nei- ther in German nor in English. RO tjTh tjP tjAr tjA tjD Figure 3: Exemplary trajectories Table5 shows exemplary results for the trajectories in Fig. 1 and 3.... ..."

Cited by 13